BMI V2 150W TC Box Mod
Made in Southern California
Beastmode Industries has finally launched their long anticipated follow-up to one of the most iconic box mods in our industry with the BMI V2, integrating the new 150W TC VO Chipset made locally in Southern California that brings a whole new level of performance and maintaining the beloved chassis design and dimensions of the original. The BMI V2 integrates the new 150W TC VO Chipset, designed in conjunction with Beastmode Industries and made locally in Southern California, bringing a 5 to 150W maximum power output with support for 0.1 to 3.0 ohms, a battery state controlled bypass mode, and flexible and highly accurate temperature control capability with onboard support for Ni200 Nickel, Titanium, and Stainless Steel 316 heating elements. This new chipset drastically increases the range and versatility as compared to the original BMI, pairing a high quality chipset with the iconic world class chassis. The chassis remains true to the roots of the original BMI, with the no nonsense industrial design language that gave Beastmode Industries worldwide renown in our industry. The frame is 100% custom CNC machined out of extremely high quality aluminum, combining near unmatchable durability and ruggedness with a well balanced fit and feel. A focus on presenting a cleaner aesthetic with the V2 shifts the control interface, besides the firing button, to the inside of the chassis giving the exterior a beautiful minimalistic aesthetic accented by BMI's signature laser engraving on the front and rear panels. The interior showcases BMI's signature streamlined and neatly wired design, with a custom battery sled that features gold plated contacts. The impossible synergy of beautiful, minimalistic aesthetic with rugged, no holds barred quality and feel, the BMI V2 150W TC has returned to sit squarely atop the box mod market.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 100% Custom CNC Machined Aluminum Chassis
- Anodized Finish
- Solid Feel
- Heavy Duty Durability
- Deep Laser Engraving
- Same Dimensions as BMI V1
- Three Bottom Vent Holes
- VO Chipset
- Made in the USA
- 5 to 150W Power Output
- 0.1 to 3.0 ohm Atomizer Resistance Range
- 1V to 9.5V Output
- 40.0A Maximum
- Bypass Mode
- 0.25 to 3.0 ohm Atomizer Resistance Range
- Output Based on Battery State
- Temperature Control Support
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel 316 Support
- 212 to 572 Degrees Fahrenheit Range
- Anti Dry Burning Technology
- Short Circuit/Overheat/Reverse Polarity/Low Resistance/Low Battery Voltage Protection
- Quad Magnetized Battery Door
- Signature BMI Wiring
- Clean and Distinct
- Neatly Organized Interior
- Interior Screen
- Sleek Exterior Look
- BMI Engravings on Interior Plate
- Oversized Adjustment Buttons
- Laser Engraved 22mm 510 Connection
- Floating Brass Connection
- One BMI V2 150W TC Box Mod
- BMI Welcome Letter and Manual
- Presentation Box
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.