Home > Devices >

  The "fatbaby"® 100 Watts Mod V1.5 by Project Sub-Ohm™ (Black)
Black fatbaby Mod by Project Sub-Ohm

Alternative Views:

Our Price: $99.99

This item excludes from certain discount offers.

Stock Status: (Out of Stock)

Product Code: FB0001

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when buy together

VaporDNA™ Edition Unicorn Refillable E-Juice Bottle (30ml) [Add $1.25]

Ultra Compact Ohm Meter by Efest (Ohm Meter + Voltage Meter) [Add $18.99]

UD Coil Jig [Add $8.99]

UD Ceramic Tipped Tweezers [Add $9.99]

VaporDNA™ VapeBand™ [Add $1.49]

Welcome The Grandson Of the "littlemaN"™! Project Sub-Ohm™ Has Created The "fatbaby"™ 100 Watts Mod! Many Upgrades For V1.5.

Copper Center Pin is now adjustable!

NOTE: We decided to do things a little differently this time, so all serial numbers on "fatbaby"™ are Roman Numeral serialized! Starting from I, II, III and so on.

***This listing Is For "fatbaby"™ Mod V1.5 Only!

"fatbaby" By Project Sub-Ohm™

Ever since the introduction of the "littlemaN'™ Box mod, the "littlemaN"™ has gain a huge popularity among the world of vapers! Now Project Sub-Ohm™ has found a perfect platform to build on its third box mod. The "fatbaby"™ 100 Watts Mod V1.5 made by Project Sub-Ohm. The goal is simple, to create an affordable yet still super powerful device that can satisfy majority of the vapers out there!

Improvement Over "fatbaby" V1:
  • Center Copper Pin is now spring loaded adjustable
  • No more screws for the battery door! It's now fully magnetic for ease of changing batteries.

Product Includes:
  • 1 x "fatbaby"™ Mod V1.5 by Project Sub-Ohm™
  • 1 x instruction manuel
  • 1 x signature "fatbaby" Mod gift box with Project Sub-Ohm™ and 'fatbaby"™ logo

Product Descriptions:

The "fatbaby"™ series by Project Sub-Ohm™ is a powerful Variable Wattage Device that can adjustable it's power from 10W to 100W in increments of 0.1 Watts! This device uses upgrade YiHi SX330 Chip, which is capable of firing coils at 0.15 ohm up to 3.0 ohm. The "fatbaby"™ Mod is powered by a dual IMR 18650 battery and is capable of producing up to 100 Watts of power! For V1.5, the strong magnets are installed to hold the back battery cover instead of using of the screws for ease of swapping batteries. The battery is removable, so changing batteries are a breathe to do. The OLED screen is bright and easy to read, and also shows you the wattage, resistance, output voltage and battery life.

Product Features:
  • Beauty screen and greeted with "fatbaby"™ when turned on
  • Full Aluminum Body For rigidity!
  • Capable of firing 0.2 ohm - 3.0 ohm build
  • Capable of putting out 100 Watts of power!
  • Beautifully Engraved With Project Sub-Ohm™ Logo and "fatbaby"™ logo
  • Serialized (Roman Numeral Serialization, I, II, III and so on)
  • Roman Numeral Serialization is an extremely labor intensive work, each number is manually adjustable with live people!
  • Matches all other Project Sub-Ohm™ products
  • We Made It Powerful! We Made it Affordable!
  • Unique and Elegant "fatbaby"™ gift box packaging. (Highly Sought After!)
  • One Year Manufacture Warranty

Product Specs:
  • Output Power: 10W - 100W
  • Output Voltage: 1.5V - 7.0V
  • Loading Resistance: 0.15 ohm - 3.0 ohm
  • Output Short Circuit Protection
  • Reverse Battery Protection
  • Dimension: 102mm x 56mm x 23mm (2-3/16" x 4" x 7/8")

Product Recommendations:
  • Please do not put in your battery in wrong direction
  • Make sure battery sit completely snug in the battery slot
  • Do not use any batteries if the outside wrapper has come off!
  • Turn off the device before pulling your battery out
  • Do not wrap your coils below recommanded ohm level and always vape safe!
  • 510 pins are reverse threaded, do not force it pin does not turn
  • Alway turn off the device and take the batteries out when not in use!

***One Year Manufacture Warranty.

Warning: Project Sub-Ohm™ is a product design and development studio for Electronic Cigarettes and do not involve in any product manufacturing process. Use this product at your own risk. In no event, regardless of cause shall VaporDNA™ and Project Sub-Ohm™ be liable for any type of bodily injury or property damage.

***Always turn off the device and take the batteries out when not in use!

Advanced User Item. Use AT YOUR OWN RISK!


NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.

Average Rating: 5 of 5 Total Reviews: 26 Write a review »

  0 of 0 people found the following review helpful:
Monster Smash! February 3, 2015
Reviewer: Leroy from Katy, Tx  
SN: CCCII checking in.
I picked this up to replace my ZMax V3 so I could start using the new Atlantis and Sub-Tank, along with RTA/RDA's. This thing rocks! Build quality is superior to my buddies IPV3. Performance wise, it hangs solid all the way up to 100W! I have run a .2 ohm quad coil setup @ the full 100W without even a stutter. With my tanks and RTA's I vape in the 25W-35W range. I can go 3+ days between battery swaps! Even though it does not win a watt race, it wins with build quality and reliability. I will have this mod for a very long time.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Working Amazing. December 30, 2014
Reviewer: Joshua Gibson from California  
For starters, just opening the package, I can the box was well made, sturdy to prevent any shifting during shipping. VaporDNA was EXTREMELY speedy with their shipping, per usual.

I've had the Mod for about a month now and I've dropped it more than a few times and she's still working like a charm. The Magnets are really one of the best features about this. I can't tell you how annoying it is to constantly unscrew and re-screw your box mods to swap out batteries, with the FatBaby, it's a breeze, taking no more than a few second.

I would buy this product again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great Box Mod December 19, 2014
Reviewer: Michael Dach from Vancouver, WA United States  
Logos are clean, great quality. I haven't been able to put this thing down!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
pretty 100w box, solid December 19, 2014
Reviewer: Dustin from MD  
It's a 100w box, does that job as well as others I've encountered. The coating on it is pretty slick looking up close, feels good. It has held up well, and I've been pretty abusive, cargo pockets with other doodads. The magnetic battery compartment is very well done, feels solid. The 510 on this is quite good as well, I believe it's spring-loaded and stainless, or the coating on the brass is really good and I have yet to wear through it. Either way it is solid, and flush mounts drippers and tanks just fine. The battery compartment also has a ribbon built in, which lets you pull the batteries out quickly without having to use your nails.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Excellent December 18, 2014
Reviewer: Brian Grady from Franklin, KY United States  
You will love it

Was this review helpful to you?

View All Customer Reviews