Catemizer 30mm RDA by Congrevape
Designed in California
The Catemizer 30mm RDA by Congrevape is the direct competition to the Doge RDA, taking cloud production to an entire new level with an enormous 30mm profile specifically geared towards high performance box mods, four choices of center posts with each post hole measuring in at a staggering 4mm, a black ceramic 14m drip top, and the Cate Scratch diagonal airflow system for maximum clouds. The Catemizer is built specifically for extreme wattage output (please use the utmost caution and safety with use of this RDA) starting from the Black Ceramic 14mm Drip Top. The utilization of Ceramic as the drip top greatly reduces heat transfer from the cap to the tip, while also remains non toxic and practically melt proof under practical conditions.. The Cate Scratch diagonal airflow system is fully adjustable and is designed to incorporate bottom airflow principles while reducing possible leaking. Expanding upon the heritage of the Doge series, the Catemizer provides users the option to use two different styles of center post options in two types of materials, with a single post option in 304 Stainless Steel and C110 Copper and a split post option in both of those materials as well. Each post hole, regardless of style and including the deck milled negative posts, measures at 4mm which giving users an unbelievable array of compatible coil configurations and possibilities. Manufactured out of 304 Stainless Steel, the Catemizer has a copper contact pin, and in full copper mode, is one of the top performing RDA's in the market. Designed to be the undisputed king of clouds, the Catemizer 30mm RDA by Congrevape is the ultimate in ultra performance rebuildable dripping atomizers.
- 30mm Outer Diameter
- Cate Engraving
- Black Ceramic 14mm Bore Drip Top
- Cate Scratch Airflow
- Diagonal 18mm Long
- Tapers from 5mm at Widest Point
- Fully Adjustable Airflow
- Four Included Center Post Options
- Single Post Hole in C110 Copper or Stainless Steel
- Measures 4mm in Diameter
- Dual Split Positive in Copper or Stainless Steel
- Measures 4mm in Diameter
- Deck Milled Negative Posts
- C110 Copper and Stainless Post Screws Included
- 6mm Deep Juice Well
- PEEK Insulators
- C110 Copper Contact Pin
- 304 Stainless Steel Construction
- One Catemizer 30mm RDA by Congrevape
- C110 Copper Single Center Post Preinstalled
- Two Additional Dual Split Positive Posts
- C110 Copper and 304 Stainless Steel
- One Additional 304 Stainless Steel Single Center Post
- Four Additional 304 SS Screws
- Three Additional C110 Copper Screws
- One Extra PEEK Insulator Set
- Extra O-Rings
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.