Home > Rebuildables > Rebuildable Dripping Atomizers (RDA) > Special Airflow Effect RDAs >

Cthulhu Mods Hastur V2 Two Post RDA
Cthulhu Mods Hastur V2 Two Post RDA

Alternative Views:

List Price: $39.99
Our Price: $29.99
Savings: $10.00

Stock Status: In Stock

Product Code: CMHRDA

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when buy together

VaporDNA™ Edition Unicorn Refillable E-Juice Bottle (30ml) [Add $1.25]

UD Builder's Choice Six Piece Screwdriver Set [Add $5.99]

Coil Master 521 Tab Mini Elite Ohm Meter [Add $18.99]

Black Coil Magician Automatic Coil Jig [Add $28.99]

Coil Master Ceramic Tweezer [Add $8.99]

VaporDNA™ VapeBand™ [Add $1.49]

Cthulhu Mods Hastur V2 Two Post RDA

The Hastur V2 Two Post RDA is Cthulhu Mods' newest entry into the rebuildable dripping atomizer scene, combining a well balanced size profile with a two post dual terminal build deck, a squonk ready center pin, and a rechanneled top airflow. Featuring a two post build deck, which has quickly become the benchmark design for usability and effectiveness, the Hastur V2 integrates two 1.5mm terminals per post to allow for easy coil setting and configuration. The base juice well measures 5mm deep alongside PEEK insulators that make for a versatile building platform. The Hastur V2 also includes a squonk ready center pin that allows users to utilize the RDA with squonk based devices for extended range. Airflow of the Hastur V2 features a rechanneled airflow approach in which the external air intakes are located nearer to the top of the barrel, then 'swirled' down to enter the chamber 6mm lower, minimizing leakage while providing a unique airflow pattern. Each airslot measures 11mm by 2mm and can be throttled down based on user preference. Two drip tip options are included with each set, with a proprietary fitted delrin drip tip that features a spitback protection design alongside a dual o-ring sealed 510 drip tip adapter. Measuring 20mm in height from base to drip tip base, the Hastur V2 is manufactured out of 304 Stainless Steel to provide good durability and heft to match the smaller overall sizing. Built to be a versatile, affordable, and full featured platform, Cthulhu Mods' Hastur V2 Two Post RDA has the range and capability to be utilized in flavor, vapor, and squonk centric set-ups.

Product Features:
  • 22mm Base Diameter
  • Rechanneled Side Airflow
    • 11mm by 2mm Each Airslot
      • Adjustable
    • Airflow Intake Funneled from Top Side of the Chamber
    • Enters Chamber Directly Above Well
    • Minimizes Leaking
    • Turbulent Airflow
  • Two Post Build Deck
    • 1.5mm Diameter Terminals
      • Two Terminals Per Post
    • 5mm Deep Juice Well
    • PEEK Insulator
  • 510 Drip Tip Adapter
  • Adjustable 510 Connection
  • 304 Stainless Steel Construction

Product Includes:
  • One Hastur Two Post RDA
  • 510 Drip Tip Adapter
  • Squonk Ready Center Pin
    • Bottle and Tubing Not Included
  • Spare Parts Set

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use At Your Own Risk!

NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Average Rating: 3 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
Flavor!! December 22, 2016
Reviewer: NastyBadMan from New Iberia, LA United States  
Excellent flavor & very good vapor production.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Good flavor bad O Rings October 14, 2016
Reviewer: Dustin Van Dyne from TX United States  
This is a good atomizer for the price! Solid performance and flavor. The O Rings that hold the two barrels to the base are not tight enough so the cap can come off easily in a bag or pocket. Its easy to fix with some thicker O Rings. But for the price its a great option for squonking!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Cute...like a "mini me" RDA July 30, 2016
Reviewer: CHAD CONWAY from EAGLE RIVER, WI United States  
The Hastur V2 is a nice little RDA, it's just on the sub compact side of the scale.  I like the look of it, and it's a fairly quality built atty,  it just looks ridiculously small on my Lost Vape DNA200

Was this review helpful to you?

  0 of 0 people found the following review helpful:
It's an area with July 6, 2016
Reviewer: Anonymous Person  
Sqonk pin

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Needs Work to Work well May 4, 2016
Reviewer: Jon from NC United States  
So far, I've had to replace the o-rings to secure the top cap and inner barrel, then after stripping all the  hex screws I found some slotted screws that fit.  
I'm about to make a replacement delrin drip tip (same outer dimensions as the "wide bore" that is included but with a 9mm straight bore and a single, thicker o-ring.  
Later on (if I decide to keep using it) I'll drill out the post holes and see what happens. :)
Another tip, it's best to build as close to the posts as possible to keep your wicks from blocking the inner airflow slots.
It also helps to pre-bend your leads at 90° angles so that they are the same distance apart as the post holes.
Like so  |_      _|
Overall, I can't recommend this to someone who just wants to build, wick and vape.  It just doesn't work well at all in its stock form.

As an aside, I don't see why they included a 510 drip tip adapter, anything taller than the wide bore tip that is included just looks ridicules.

Was this review helpful to you?

View All Customer Reviews