Eleaf iStick 200W TC Triple 18650 Box Mod
The Eleaf iStick 200W TC Box Mod is the first Eleaf device to feature triple 18650 battery capability alongside an astounding 200W maximum output, sophisticated temperature control, and an incredible price point. The Eleaf iStick 200W TC features a power range of 1 to 200W and can fire atomizers down to 0.1 ohms in standard wattage modes. The 200W maximum is driven by three high amperage 18650 batteries (sold separately) which not only allows for a true 200W output, but also provides astounding battery life. Full temperature controlled output is capable on the iStick 200W TC, with onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements along with a TCR mode that allows users to set and adjust up to three memory modes. The chassis of the iStick 200W TC builds upon the most critically acclaimed device from Eleaf's sister company Wismec, with a new center aligned control face and a new four button adjustment that makes everyday usage easier than ever before. The center aligned control face allows for the iStick 200W TC to rest comfortable within the palm of the hand while being controlled via the user's thumb. An effort to greatly improve battery loading has resulted in a redesigned locking battery door located at the base of the device, allowing users to quickly insert the batteries while reducing friction and damage to the battery casing. With a joint designed chassis founded in the Wismec RX200, the Eleaf iStick 200W TC Box Mod is a well rounded, affordably priced high performance device worthy of being in any collection.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 1 to 200W Power Output
- 0.1 to 3.5 ohm Atomizer Resistance Range
- Firmware Upgradeable
- Full Temperature Control Output
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- Three Memory TCR Mode
- Set Own Temperature Coefficient of Resistance
- Fine Tune Output
- 0.05 to 1.5 ohm Atomizer Resistance Range
- Resistance Lock
- 200 to 600 degrees Fahrenheit Range
- Ergonomic Chassis
- Center Aligned Control Face
- Four Button Operation
- Firing Button
- Adjustment Buttons
- Mode Setting Button
- Comfortable and Compact
- Triple 18650 Battery Powered
- Locking Battery Access Door
- Located at Base of the Device
- Easily Load Three 18650 Cells
- Batteries Sold Separately
- Dual Circuit Protection
- Software and Hardware Protections
- Over Charge
- Over Current
- Over Discharge
- Reverse Polarity Protection
- Temperature Protection and Alert
- Imbalanced/Check Battery/Charge Error Alerts
- Spring Loaded 510 Connection
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.