Eleaf iStick 40W TC Temperature Control Mod
The iStick TC40W is Eleaf's first temperature control based mod, combining a highly accurate temperature control module, a 2600mAh battery, and a small compact form factor. Using Eleaf's new TC (temperature control) module, the iStick TC40W has the capability to fire Ni200 Nickel Coils within a range of 200 to 600 degrees Fahrenheit, greatly fine tuning the user experience. The iStick TC40W has a resistance range of 0.05 to 1.0 ohms in TC mode. A traditional wattage based output is also included, with a range of 1 to 40W, with a minimum atomizer resistance of 0.15 ohms. This gives the TC40W fantastic versatility, and with the easy to read OLED screen and menu navigation, making the iStick TC40W a premier entry level device with an advanced feature set. A 2600mAh battery gives the mod great range, and with it's diminutive size, makes the TC40W portable and powerful. Building upon the legacy of the iStick platform, Eleaf has again created an extremely competitive device in the iStick TC40W.
- Temperature Control Range 100 to 315 Degrees Celsius/200 to 600 Degrees Fahrenheit
- 0.05 to 1 ohm
- Lock/Unlock Atomizer Resistance
- 1 to 40W Output Wattage
- 2600mAh Battery
- Stainless Steel 510
- Spring Loaded Brass Connector
- Three Button Adjustment
- Stainless Steel Firing Button
- OLED Screen
- Resistance Level Readout
- Output Voltage Readout
- Output Wattage Readout
- Output Temperature Readout
- Battery Life Indicator
- Screen Rotation Setting
- Stealth Mode Capability
- Low Voltage Protection
- Temperature Protection
- Temperature Alert
- Atomizer Protection
- Short Circuit/No Atomizer Protection
- One Eleaf iStick TC40W Mod
- One Ego Adapter
- One Micro USB Cable
- One Manual
- Temperature Control Output can only be used with appropriate Ni200 Coils.
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.