Home > Devices > Starter Kits >

  Eleaf iStick Pico Mega 80W TC Starter Kit - Jay Bo Designs
Eleaf iStick Pico Mega 80W TC Starter Kit by Jay Bo Designs


 
Alternative Views:


List Price: $69.99
Our Price: $48.99
Savings: $21.00

Stock Status: In Stock

Product Code: ISTPIM

Choose Your Device Finish
Click to view another Choose Your Device Finish

  

Qty:  
Description
 

Eleaf iStick Pico Mega 80W TC Starter Kit by Jay Bo Designs


The Eleaf iStick Pico Mega extends the range and versatility of the critically acclaimed iStick Pico, allowing for the use of both 18650 and 26650 battery platforms alongside Eleaf's newest PCB that features a maximum output of 80W, Smart Mode capability, and a visually streamlined display. The chassis of the Pico Mega is fundamentally grounded in the highly ergonomic iStick Pico, enlarged to allow the platform to use 26650 batteries while still maintaining 18650 compatibility (all batteries sold separately). In 26650 mode, power output tops out at 80W (75W in 18650 mode) with support for Ni200 Nickel, Titanium, Stainless Steel, and three memory TCR temperature controlled output. The Pico Mega is the second device to integrate the new Smart Mode and, when activated, automatically senses the resistance of the atomizer installed and allows users to set up to 10 output settings which will automatically recognized once the appropriate atomizer resistance has been set. Paired with the Pico Mega is the full size Melo III Sub-Ohm Tank, which features a 4 milliliter top filled tank reservoir and a stealth embedded airflow control system. New to this kit is the introduction of the 0.25 ohm 316L NotchCoil, pairing perfectly with the output ranges of the Pico Mega. Asserting itself squarely at the top of the starter kit market segment, the Eleaf iStick Pico Mega 80W TC Starter Kit by Jay Bo Designs is a thorough upgrade to the original, providing versatility, range, and performance in an affordable set.

iStick Pico Mega 80W TC Features:
  • 1 to 80W Power Output
    • 0.1 to 3.5 ohm Atomizer Resistance Range
    • Firmware Upgradeable
      • V1.01 Preloaded
    • 1 to 75W Power Output
      • 18650 Mode
  • Full Temperature Control Output
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • Three Memory TCR Mode
      • Set Own Temperature Coefficient of Resistance
      • Fine Tune Output
    • 0.05 to 1.5 ohm Atomizer Resistance Range
    • Resistance Lock
    • 200 to 600 degrees Fahrenheit Range
  • Smart Mode
    • Adjustment with Atomizer Installed
    • Saves Up to 10 Output Settings per Resistance Level
    • Automatically Reads and Configures Stored Output Settings
  • Custom Logo Capable
    • Upload a Monochrome 96 by 16 Pixel BMP Image
  • Compact Form Factor
    • 53.5mm by 31.5mm by 73.5mm
  • Simplified OLED Screen
    • Battery Life Indicator
    • Output Wattage/Temperature
    • Atomizer Resistance
  • 18650 or 26650 Powered
    • Top Loaded
    • Native 26650 Support
    • 18650 Support
      • With Sleeve
    • Battery Not Included
  • Three Button Operation
    • Bottom Adjustment Buttons
  • Spring Loaded 510 Connection
  • Micro USB Charge Port

Melo III Sub-Ohm Tank Features:
  • 22mm Diameter
  • 4ml Tank Capacity
  • Top Fill System
  • Melo III Coil System
    • 0.25 ohm 316L NotchCoil
      • 30 to 80W
    • 0.5 ohm Kanthal Coil
      • 30 to 100W
    • Compatible with Atlantis, Triton and cCell Coil Structures
  • Invisible Airflow Control
    • Discreetly Throttled Up and Down
  • Heat Insulated Drip Tip
  • 65mm Height
  • 304 Stainless Steel

Product Includes:
  • One iStick Pico Mega 80W TC
  • One Melo III Mini Sub-Ohm Tank
    • 0.25 ohm 316L NotchCoil
    • One 0.5 ohm Kanthal Coil
  • Micro USB Charging Cable
  • User Manuals

Advanced User Item. Use AT YOUR OWN RISK!

NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Mike Vapes - Eleaf Pico Mega & Melo 3

Average Rating: 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
A+ November 9, 2016
Reviewer: bangbangzz1 from Logan Reserve, Queensland Australia  
Im really happy with this little mod. It's really comfortable in the hand, it looks great and is versatile being able to use an 18650 or the 22650 and capable of firing up to 80W, adequate for pretty much every sub-ohm tank. The Melo III tank that came with the Mega Pico is my favorite. No spit back, great flavor and vapor production. Another pro is that it doesn't leak

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great product November 7, 2016
Reviewer: Joe Sanchez from Commerce, CA United States  
Bought a 2nd one for backup (I keep dropping     it my fault but it keeps working fine) only problem is limited on tank sizes. I don't mind the melo3  exellent place to buy.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Nice little box August 28, 2016
Reviewer: Xerxes Tecson from San Diego, CA United States  
This is my main device. It has enough power for my needs. I like to use smart mode and keep the setting between 18-25. It's easy to upgrade the firmware so it can go up to 100W -probably never going to go that high but glad to know I can if I wanted to. I don't mind that the +- buttons are on the bottom and I have a wall charger so I never use the USB port on the bottom.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Awesome little mod August 14, 2016
Reviewer: David from Santa fe, NM United States  
First I bought the Pico, then I bought this mega and both are outstanding little mods. I recommend both of these units.

Was this review helpful to you?