GeekVape Griffin 25mm Two Post Top Airflow RTA
The Griffin Two Post 25mm Top Airflow Edition RTA is the follow up to one of the most highly regarded rebuildable tank platforms in the industry, increasing tank capacity to an astounding 6ml while simultaneously enlarging the build deck to a massive 17mm, creating one of the most capable and versatile systems today. Catering to box mod centric set-ups, the Griffin 25mm RTA has almost doubled tank capacity as compared to the 22mm variation, creating an incredibly rangy RTA that couples with the increased build deck sizing for high powered coil systems. The build deck features a 17mm diameter with a two post, dual 2mm diameter terminal, side tension applied design that can easily accommodate a huge variety of build types and coil configurations. New to the Top Airflow edition of the Griffin 25mm are quad 5mm by 1.5mm adjustable top airslots that feed airflow directly into the build chamber, adding another layer of airflow. The top airflow system can be used in conjunction or independently from the bottom 13mm by 2mm airslots, as each system can be throttled and closed separate from one another. A revision to the Griffin 25mm come in the way of slightly raising the bottom airflow found within the deck allowing for focused and direct airflow to each coil that increases airflow effectiveness and efficiency. For single coil centric builds, two ceramic single coil adapters are included with each set, effectively closing one side of the build chamber to optimally run single coils. The construction of the Griffin 25mm features GeekVape's hallmark quality, with SS 316 Nitrogen Treated Set Screws, a full gold plated contact pin, a high quality stainless steel chassis, and USA made PEEK that all contribute to it's firm place as one of the most well built atomizers today. Taking one of the most critically acclaimed platforms to a completely new level, GeekVape has once again asserted itself at the top of the rebuildable tank atomizer market with the Griffin 25mm Top Airflow RTA.
- 25mm Diameter
- 6ml Tank Capacity
- Top Fill System
- Adjustable Wicking Holes
- Can Be Fully Closed
- Rotatable from Base
- Two Post Rebuildable Deck
- 17mm Diameter
- Gold Plated Center Post
- Side Tension Applied
- SS316 Set Screws
- 55 to 58 HRC
- 1200 Nitrogen Surface Treated for Hardness
- Two Terminals Per Post
- PEEK Insulator
- Easily Adjustable Wick Port Ring
- Dual Bottom Airflow
- Focused Cylinder
- Minimizes Leakage
- Direct to Coil Airflow
- 4.4mm by 3.5mm each
- Ceramic Single Coil Adapter
- Blocks One Side of the Deck
- Effectively Run Single Coil Configurations
- Dual Adjustable Airflow
- 13mm by 2mm Each Airslot
- Four Airflow Settings
- Quad Adjustable Top Airflow
- Redirects Down into Build Chamber
- Can Be Completely Closed
- 5mm by 1.5mm Each Airslot
- 9mm Bore Delrin Drip Tip
- 510 Drip Tip Adaptor
- Stainless Steel and Glass Construction
- Gold Plated 510 Connection
- One GeekVape Griffin 25mm Top Airflow Edition RTA
- One Additional Frosted Glass Tank Section
- One Additional Ceramic Single Coil Adapter
- Spare Parts Pack
- One Multi Tool
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
RiP Trippers The Griffin 25mm RTA by GeekVape
VapnFagan Reviews the Griffin 25mm RTA!