GeekVape Griffin Mini 25mm Two Post RTA
The Griffin Mini 25mm Two Post RTA brings the dynamic and highly regarded Griffin 25mm platform into a smaller RTA form factor to create a well balanced performance range that is capable through extensive redesign of the both the build deck and the wicking systems. Shortening the overall height from base to base of top cap by over 10mm, the Griffin Mini 25mm manages to hold a 3 milliliter reservoir despite the dramatic height reduction, and is filled through the threaded top cap system. Each kit is preinstalled with the top airflow top cap, featuring four 5mm by 1.5mm airslots with three airflow settings. Also included with each kit is the standard airflow top cap, shortening the overall height and size of assembly even further by removing the adjustable top airflow, allowing users to easily switch between the two top caps as desired. A major redesign of the build deck allows for the shorter overall profile, while retaining the build friendly and widely versatile properties of the standard Griffin 25mm. The Mini utilizes a stacked two post design with four 2mm diameter terminals that allows for efficient use of space while still having the capacity to insert demanding coil configurations. The wicking system also sees a redesign towards a subdeck style wicking style that feeds liquid from the reservoir into two slots spanning both sides of the build decks and entering the chamber itself through four 2mm ports. Internal airflow is increased, measuring 4.5mm by 5.3mm each side of the deck, and is fed directly from the dual 15mm by 1.5mm dual airslots around the base of the Mini. The Griffin Mini also retains the single coil capable designs from it's larger sibling, including one highly heat resistant ceramic single coil adapter and a more pliable silicone single adapter in each kit. Implementing sweeping build deck and wicking design changes while retaining the same core principle of high performance and versatile output, the GeekVape Griffin Mini 25mm is perfect for those looking for a more compact form factor RTA without output compromise.
- 25mm Diameter
- 3ml Tank Capacity
- Top Fill System
- Dual Wide Area Filling Ports
- Two Post Rebuildable Deck
- 18mm Diameter
- Stacked Post Design
- 2mm Diameter Terminals
- Four Total Terminals
- Gold Plated Center Post Housing
- PEEK Insulator
- Subdeck Wicking System
- Liquid Enters Below Deck
- Simple and Effective Wicking
- Quad 2mm Wicking Ports
- Dual Bottom Airflow
- Rectangular Design
- 4.5mm by 5.3mm each
- Ceramic Single Coil Adapter
- Blocks One Side of the Deck
- Effectively Run Single Coil Configurations
- Silicone Coil Adapter Also Included
- Dual Adjustable Airflow
- 15mm by 1.5mm Each Airslot
- Quad Adjustable Top Airflow
- Redirects Down into Build Chamber
- Can Be Completely Closed
- Three Settings
- 5mm by 1.5mm Each Airslot
- Standard Airflow Top Cap Included
- Shortens Overall Height
- Removes Top Airflow
- 9mm Bore Delrin Drip Tip
- Stainless Steel and Glass Construction
- Gold Plated 510 Connection
- One GeekVape Griffin Mini 25mm RTA
- One Additional Glass Tank Section
- One Standard Airflow Top Cap
- One Ceramic Single Coil Adapter
- One Silicone Single Coil Adapter
- Spare Parts Pack
- One Multi Tool
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
VapnFagan Reviews the Griffin Mini 25mm RTA!