GeekVape Griffin Two Post RTA
The Griffin Two Post RTA by GeekVape manages to pack in one of the largest and most diverse two post build decks within a 22mm diameter, featuring a large dual post hole design, gold plated contacts, 3.5ml tank capacity, and externally adjusted wick ports. The Griffin RTA features one of the largest and most capable two post build decks in the market, with a side tension applied quad terminal design, with each terminal measuring an ample 2mm in diameter. Built specifically for dual coil configurations, the deck allows each coil lead an class leading 2mm per lead, allowing for complex and large area coil structures such as Clapton coils to be easily mounted and utilized. A rectangular PEEK insulator secures the positive post, providing tremendous heat dissipation and preventing post turning. Each side of the deck is fed by 4mm by 2.5mm bottom airflow slots, with a dual exterior intake measuring 12mm by 2mm each airslot, providing ample and generous airflow. The Griffin implements an extremely wide area top fill system to easily fill the 3.5ml tank. With one of the most capable two post build decks in the rebuildable tank market, the GeekVape Griffin Two Post RTA is a definitive must for enthusiast builders.
- 22mm Diameter
- 3.5ml Tank Capacity
- Top Fill System
- Adjustable Wicking Holes
- Can Be Fully Closed
- Rotatable from Base
- Two Post Rebuildable Deck
- Gold Plated Center Post
- Side Tension Applied
- Two Terminals Per Post
- PEEK Insulator
- Easily Adjustable Wick Port Ring
- Dual Adjustable Airflow
- 13.5mm Delrin Drip Tip
- 510 Drip Tip Adaptor
- Gold Plated 510 Connection
- One GeekVape Griffin Two Post RTA
- Additional Glass Tank Section
- O-Ring and Screw Pack
- Delrin 510 Drip Tip Adaptor
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
Rip Trippers - https://www.youtube.com/watch?v=aHCuvHcU2B8