HCigar VT200 DNA 200 Box Mod
The HCigar VT200 Box Mod is a giant leap in vaping technology, with the integration of Evolv's DNA 200 Chip Set that features the most advanced and comprehensive output technology in today's market, with a wattage range of 1 to 200W, a voltage range of 1 to 9.0V, and an incredibly diverse software suite in Escribe. With a svelte and form friendly elliptical arc design, the VT200 features soft curves combined with clean cut hard lines. The result is a device that fits perfectly into the user's hands, making daily use easy and non-fatiguing. Integrated within the VT200 is a 1300mAh 3S Lithium Polymer Battery, feeding the onboard Evolv DNA 200 with the necessary power to reach 200W to full effect. The DNA 200 is capable of extreme precision from 1 to 200W with an incredible efficiency rating of 97%. Coupled with the Escribe software (link for download will be provided below), allows the VT200 for the most fine output measurements and parameters in today's market. In standard operating mode, the VT200 is capable of firing Kanthal based heating elements up to 100W and Ni200 Nickel (other temperature based heating elements also supported through Escribe) atomizers up to 200W with temperature ranges from 200 to 600 degrees Fahrenheit. With an unbelievable performance range, unprecedented customization features, and an solid, finely tuned chassis, the HCigar VT200 DNA 200 Box Mod is sure to make a tremendous impact in today's market.
VT200 Product Features:
- Official Evolv DNA 200 Chip Set
- 1300mAh 3S Lithium Polymer Battery
- Elliptical Arc Design
- Manufactured out of Environmentally Friendly Aluminum
- Ergonomic, Light, and Hand Friendly Design
- Micro USB Charging and Escribe Connection Port
- Gold Plated 510 Threadpoints
- Silver Plated Contact Pin
- Three Button Adjustment
- Knurled Adjustment Buttons
DNA 200 Features:
- 1 to 200W Output Range
- 100W Kanthal Range (Able to be changed through Escribe)
- 200W Max Temperature Range
- 1 to 9V Output
- 0.1 to 2.0 ohm Kanthal Resistance Range
- 0.08 to 1.0 ohm Temperature Sensing Range
- Temperature Range
- 200 to 600 Degrees Fahrenheit
- Cell by Cell Monitoring
- Cell Balancer
- Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection
- Autosensing Temperature Resistance
- Lock Mode
- Stealth Mode
- Power Lock Mode
- Power Preset Mode
- Resistance Lock
- Max Temperature Adjustment
- Output Current Continuous Max
- Output Current Instantaneous Peak
- Input Voltage
- Input Current
- Screen On Current
- Quiescent Current
- Power Down Current
- In order to use temperature control output, coils must be built using non-resistant wire. Evolv recommends Ni200.
- Please refer to Escribe documentation for walkthroughs and information on how to utilize Escribe.
***Always turn off the device and take the battery out when not in use!
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.