Specials

Starter Kits

E-Juice

Accessories

Featured Brands

Shop By Price

Accept Credit Cards


  Home > Devices >

  Hana Modz Pack Mini - DISCONTINUED
Hana Modz Pack Mini


 
Alternative Views:


Our Price: $250.00

This item is excluded from discount offers.

Stock Status: (Out of Stock)

Availability:: Pre-Order
Product Code: RB0015

Color

  

Qty:  
Description
 
WE WILL DISCONTINUE SELLING THIS ITEM.

Hana Modz is made to order. Order will be shipped out as soon as we receive it in our warehouse. Thank you!
(NOTE: The unit is made of aluminium and most unit might have some scratches or marks, it's caused by the manufacturer process)

(2 Max per customer)

The Hana Modz Pack Mini is a DNA20 controlled battery pack with 510 connector. Variable Watt battery pack that lets you control wattage not voltage, for better consistency and repeatability. Built using quality components. Body is made of 6061 Billet Aluminum. Power regulated digital-switch mode DC-DC converter. It features a small OLED display, buttons and synchronous rectification for maximum battery life and minimal heat generation. The separate UP and DOWN allows the user to increase or decrease the power level in .1 Watt increments. Built in DNA charger, which is micro USB powered and provides a 500 milliamp charge current.

Build-in 1200mah LiPo Battery Pack.

Operating Discharge Temperature: -10 - 60 degree Celsius
WARRANTY WILL BE VOID IF YOU EXCEED THE OPERATING DISCHARGE TEMPERATURE.
USE AT YOUR OWN RISK.

USERS GUIDE:
Normal Operation Watt setting: The power level currently set on the DNA 20.
Battery indicator: The current state of charge of the battery.
Volts display: The current or most recent output voltage being supplied to the atomizer.
Ohms display: The resistance of the atomizer attached to the device. This is measured only when the unit is supplying power to the atomizer. At other times, it shows the most recent measurement.

Other modes:

Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show "Locked, Click 5X". To exit Locked mode, press the fire button 5 times.

Stealth mode: While locked, pressing the fire and down buttons simultaneously for five seconds will switch to stealth mode. In this mode the display is off. It will still show error messages and the "Locked, Click 5X" advisory. To switch back to normal display mode, from locked mode hold down the fire and down buttons simultaneously for 5 seconds. This setting is stored to internal flash memory, and remains if power is removed.

Right Mode and Left Mode: While locked, holding the fire and up buttons simultaneously for 5 seconds flips the display. This setting is stored to internal flash memory, and remains if power is removed.

Error Messages:
The DNA20 will indicate a variety of error states.

Check Atomizer: The DNA does not detect an atomizer, or the atomizer has shorted out.
Shorted: The atomizer or wiring are short circuited.
Check Battery: The battery is below 3.1 volts. It probably needs to be charged.
Weak Battery: The battery sags excessively when firing. This typically means the user is not using a high rate battery or the battery is old and degraded. It can also mean the battery is not making good contact.
Too Hot: The DNA 20D has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.
Too low power setting: The DNA 20D puts out a minimum of 4 volts. With low power settings (7 to 8 watts) and low resistance atomizers (below 2 ohms) the DNA will sometimes be unable to provide a low enough power output to be power regulating. If this is the case, the Ohms display will be flashing. The device will still operate.

Auto power down
The screen will be at full brightness while firing. After 15 seconds with no button presses, the screen will dim. 4 minutes after the last button press, the screen will fade out and the device will go to sleep mode. Pressing any button will turn the device and display back on.

DNA20 Specs: Minimum Max
Output Power 7 Watts 20 Watts
Output Voltage 4 Volts 8.3 Volts
Output Current 6 Amps
Atomizer Resistance 1.0 Ohms 3.3 Ohms
Input Voltage 3.2 Volts 4.3 Volts
Input Current 1.5 Amps 7 Amps


WARRANT WILL BE VOID IF YOU EXCEED THE OPERATING DISCHARGE TEMPERATURE. BATTERY MUST BE INSTALLED PROPERLY.
USE AT YOUR OWN RISK.

All pictures are based on practicality, copyright reserved.


Average Rating: 5 of 5 | Total Reviews: 1 Write a review »

  1 of 1 people found the following review helpful:
 
Hana Modz V2 November 18, 2013
Reviewer: Alex Lira from DeLand, FL United States  
Excellent mod.  Love vaping my I-Go W with duel coils at 1.1 Ohms.  Crazy ass vapor at 15-20 watts!  One of my favorite mods.  More importantly is the vendor.  VaporDNA gets the highest rating for their quickness of shipping and more importantly for their customer service.  Other vendors should take note.  I would greatly pay more for a product from VaporDNA knowing I will always be taken care of.  Hands down the best vendor in the business!  Thank you very much.

Was this review helpful to you?