Infinite CLT V4 Dual Deck Two Post RDA
The Infinite CLT V4 Dual Deck RDA features one of the first dual deck option platforms packaged with two distinct two post, dual terminal post sets that are easily interchangeable, making it one of the most build friendly systems currently available on the market, alongside a dual airflow system and a PEI Drip Cap. The CLT V4 features two sets of posts with each kit, with a horizontal dual terminal pair that features massive 3mm diameter terminals and a vertical dual terminal pair with rectangular terminals measuring 3mm by 2.5mm each. The design and assembly of the posts to the deck allows for a secure yet quickly interchangeable system in which builders can efficiently switch between either of the two styles of posts depending on preference or need. The CLT V4 integrates a dual airflow system, with a traditional 12mm by 2mm dual adjustable airslot pairing that enters the chamber just above the deck rim and a cleverly designed bottom airflow system that enters horizontally at the base of the RDA and is then redirected up into the funneled 3mm airholes. The bottom airflow is adjusted by an airflow control bar that rotates and can simultaneously seal both the interior and exterior bottom airflow systems if needed. The 12mm bore drip cap is manufactured out of PEI, a heat and corrosion resistant material, providing superior heat dissipation while also acting as the horizontal airflow adjustment due to the cutouts located at the base of the drip cap. With an interchangeable and highly capable build deck and post configuration coupled with a versatile airflow system, the Infinite CLT V4 makes a strong return in the RDA market with one of the best combinations of capability and value available today.
- 23mm Diameter
- Replaceable Two Post Design
- Dual Terminal Horizontal Posts
- 3mm Diameter Terminals
- Top Tension Applied
- Dual Terminal Vertical Posts
- 3mm by 2.5mm Terminals
- Side Tension Applied
- Easily Switch Posts on the Fly
- Synergize with Wide Range of Build Styles
- PEEK Insulators
- 5mm Deep Juice Well
- Dual Airflow Design
- Side Airslot Design
- 12mm by 2mm Each
- Redirected Bottom Airflow
- Enters Through Base
- Throttled by Rotating Subdeck
- 3mm Funneled Chamber Airflow
- Can Completely Seal
- 12mm Bore PEI Drip Tip
- High Temperature Resistance
- Corrosion Resistant
- Stainless Steel Construction
- Silver Plated 510 Connection
- One Infinite CLT V4 Dual Deck RDA
- Includes One Set of Horizontal Posts and One Set of Vertical Posts
- Spare O-Ring and Screw Pack
- Allen Key
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.