The eGrip Is The First Compact Sized, Built-In Atomizer From Joyetech And Is THE Device For Everyone!
The eGrip incorporates the atomizer and battery into one. This device not only features a transparent liquid window, but also a 360-degree regulation ring to adjust output wattage. The eGrip air flow on the device can be customized with the special tool to suit your vaping needs! There is a 1500 mAh battery built into the device and has an output wattage of 8 to 20 watts. The eGrip by Joyetech utilizes its dedicated atomizer head (1.5 ohm) which complements its high output.
Available In Multiple Colors: Camo, Wood, Black, and Silver.
***This listing is for One Joyetech eGrip Starter Kit Only!
Starter Kit Includes:
- Size: 3" x 1-3/4" x 15/16" (including mouthpiece)
- Capacity: 1500 mAh
- Output Mode: 20 Variable Wattage
- E-Juice Capacity: 3.6 ml
- Airflow Control
- Passthrough: Can be used while it is being charged
- 1 x eGrip Mouthpiece
- 1 x eGrip Body
- 2 x eGrip CS Atomizer Head
- 1 x eGrip Atomzier Base
- 1 x 1A Wall Adaptor
- 1 x USB Cable
- 1 x Manual & Manufacturer's Warranty Card
Variable Wattage Mode (Max 20W)
In this mode, wattage can be adjusted by rotating the regulation ring clockwise or counterclockwise. With the wattage increase, you can enjoy an increased amount of vapor.
Spin the adjustable screw on the side of the bottom. Counter-clockwise will loosen the screw. The looser the screw is, the bigger the air inlet is.
Push up the lid on the side of eGrip body, then slowly refill the liquids into the hole. And do remember to lock the cap after filling the built-in 3.6 ml tank.
Atomizer Head Replacement
Unscrew the big screw at the bottom with a coin, and the atomizer head is located on the base of it. Simply unscrew the atomizer head and replace a new one. Please remember to screw up the atomizer head before use.
Plug the USB cable to the eGrip body from the bottom, and connect it to the wall adapter or other power source such as a computer. Device can be used while charging.
Advanced User Item. Use at Your Own Risk!
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse of mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous
VaporDNA will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.