Home > Devices > Starter Kits >

Kanger CUPTI 2 80W TC Dual Battery AIO

Kanger CUPTI 2 80W TC All In One Starter Kit

Images are for illustration purposes only. Actual color, finish and packaging may vary.

List Price: $69.99
Our Price: $59.99
Savings: $10.00

Stock Status: In Stock

Product Code: KANCP2

Choose Your Device Finish

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when purchased together

GV Flask Liquid Dispenser - 30ml [Add $21.99]

Avatar VapeNut Vapor Eliminator [Add $109.99]

Coil Master Ceramic Tweezer [Add $8.99]

Coil Master 521 Mini Ohm Meter [Add $18.99]

Coil Master DIY Kit Mini [Add $24.99]


Kanger CUPTI 2 80W TC Dual Battery AIO

The Kanger CUPTI 2 is the next generation all in one system that features a dual battery bank coupled with a spacious 5 milliliter tank, dual mode output with a wattage output of up to 80W. Output features a power range of 7 to 80W alongside temperature controlled output with Ni200 Nickel, Titanium, and NiChrome heating elements, allowing it easily power the CLOCC coil family. The OLED screen and control face is classically positioned for convenience and allows for full one handed use and adjustment. The tank portion features a top filled capacity of 5 milliliters, and due to the design of the airflow and method of coil attachment, is practically leak proof. Airflow is fed from dual 10mm by 2mm airslots located at the removable top section of the tank assembly, and feeds down directly into the coil. Included with each set is a 0.5 ohm CLOCC SS316L Coil rated for 16 to 60W. Batteries are loaded into the CUPTI 2 through a spring loaded locking battery door located at the base of the chassis, and supports two high amperage 18650 batteries run in series (sold separately). Perfect for those looking for an all in one midwattage system that provides exceptional battery life and tank capacity, Kanger's CUPTI 2 80W TC is an excellent affordable option.

Purchase Replacement CLOCC Coils Here!

Product Features:
  • All In One System
    • Shaped for Comfort
    • All Day Tank Capacity
  • Dual Mode Output
    • 5 to 80W Power Output
    • 200 to 600 Degree Fahrenheit Temperature Controlled Output
      • Ni200 Nickel Support
      • Titanium Support
      • NiChrome Support
    • 0.1 ohm to 2.5 ohm Atomizer Resistance Range
  • Top Filled Built In CUPTI Sub-Ohm Tank
    • Threaded Top Fill
      • 5ml Tank Capacity
    • Adjustable Top Airflow
      • Dual 10mm by 2mm Airslots
      • Highly Leak Resistant Design
    • Top Section Attached Coil System
    • CLOCC Coil Family
      • 0.5 ohm SS316L
        • 15 to 60W
    • 11mm Wide POM 510 Drip Tip Included
    • Standard 510 Adapter Included
  • OLED Display
    • Three Line Display
    • Output Wattage/Temperature
    • Atomizer Resistance
    • Output Voltage
    • Battery Life Indicator
    • 180 Degree Rotation
  • Ergonomically Placed Firing Button
    • Adjustments Positioned Adjacent to OLED Display
  • Locking Bottom Battery Door
  • 1A Micro USB Charging Port
  • Zinc Alloy, Aluminum Alloy, and Glass Construction

Product Dimensions:
  • 51.5mm by 42.5mm by 84mm

Product Includes:
  • One Kanger CUPTI 2 System
    • One Preinstalled 0.5 ohm CLOCC SS316L
  • One Micro USB Cable
  • User Manual

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use at Your Own Risk!

NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Average Rating: 3 of 5 Total Reviews: 3 Write a review »

  1 of 1 people found the following review helpful:
Exactly What I Wanted December 11, 2016
Reviewer: Nick Reese from Kannapolis, NC United States  
Not sure what issue the others who bought this had with the coils, but I've had 0 flooding issues. Batteries that are freshly charged last me about two to three days vaping at about 60w. It's a bit bulky, but fits the hand nicely. The charging issue that the other guy said, it won't leak out if you close the airway completely, plus, the charging port is on the front with the buttons and screen, he must be talking about the Cupti One, which was poor placement for the onboard charging. All in all, this All in one is perfect for anyone. Also if you get sick of the onboard tank, slide the shaft into it and use your own RDA or tank of your choosing!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Coil flooding/leaking issues December 2, 2016
Reviewer: Anonymous Person from Long Beach, CA United States  
Like the other reviewer I think the coils are the problem with this mod.  Both coils I received with the kit flooded and if left on the side the juice will leak out the vent holes (you have to lie it on it's side to charge).  Unless you like to sip your juice instead of vaping, I'd stay away from this kit.  I gave Kanger another chance with this kit, but they still have not fixed their coil issues.  No more Kanger for me.  Just going to stick with Aspire and Eleaf.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Hoped for better November 9, 2016
Reviewer: Dig from Super secret hideout  
I really wanted to like this mod. It's a great concept and would be everything I wanted (dual battery, 5ml capacity, all in one), but the coils for this device really hold this thing back. If they improved the coil performance, this would be my all day set up.

Was this review helpful to you?