Kanger DRIPBOX 160W Squonk Kit
The Kanger DRIPBOX 160W system builds upon the revolutionary first DRIPBOX, integrating Kanger's flagship PCB driven by dual 18650 batteries to output up to 160W of power alongside full temperature control for expanded range, versatility, and ability. A dramatic upgrade over the original DRIPBOX, now integrating Kanger's new chipset that features a maximum output of 160W alongside temperature control suite with onboard support for Ni200 Nickel, TItanium, and Stainless Steel heating elements. The DRIPMOD features a dual battery design (sold separately) loaded from a locking battery door located on the base of the device. The chassis is manufactured out of Zinc Alloy and features an ergonomic chassis split in three components, with two compartments dedicated to batteries and the other compartment dedicated to the refillable squonk bottle. Designed from the ground up with an emphasis on creating the most plug and play RDA experiences to date, the SUBDRIP RDA features one of the first truly replaceable drip coil systems on the market. The SUBDRIP utilizes fully swappable and prebuilt build decks that can be utilized as is or can be rebuilt and reconfigured by the user. Each deck features a two post design with a gold plate contact located at the base of every deck to assure good conductivity. Each deck, in conjunction with the SUBDRIP base as well as the DRIPMOD's reservoir bottle, features a squonk ready configuration that feeds liquid into the deck by user applied pressure from the cutout located on the DRIPMOD. This function essentially allows users to effectively feed liquid into the deck when needed, supplied by the absolutely massive 7ml refillable reservoir bottle capacity. The Kanger DRIPBOX 160W Squonk Kit is the perfect combination of power, affordability, and ease of use, making it an essential all day vape system.
Purchase Additional DRIPBOX Coils Here!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 160W Max Output
- 7 to 160W Output Range
- 0.1 ohm Minimum Atomizer Resistance
- 0.1W Adjustment Increments
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- 0.05 ohm Minimum Atomizer Resistance
- 200 to 600 degrees Fahrenheit
- 7ml Capacity
- Feeds from Bottle
- 'Squonk' Action
- Press to Feed into RDA Deck
- Easy and Convenient
- Dripper Experience with Tank Capacity
- Locking Battery Door
- Dual 18650 Battery Powered
- Sold Separately
- Gold Plated Spring Loaded 510
- Micro USB Charge Port
- 1A Charging Port
- Battery Charge Indicator
- Zinc Alloy Construction
- Low Battery/Short Circuit/Reverse Polarity/Overtime Protection
- 22mm Diameter
- Swappable Build Decks
- Two Post Design
- Dual Adjustable Airflow
- 12mm Widebore Delrin Drip Tip
- Stainless Steel Construction
- Gold Plated Squonk Ready 510 Contact
- One Kanger DRIPBOX 160W Squonk Kit
- Extra 7ml Squonk Bottle
- Two Prebuilt 0.2 ohm SUBDRIP Build Decks
- One Micro USB Charging Cable
- One User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.