Kanger KBOX 200W TC Box Mod
The Kanger KBOX 200W TC Box Mod is the true flagship of the KBOX line, integrating the newest PCB first launched in the KBOX 120W, featuring an outstanding peak efficiency, well balanced and precise temperature control, and up to 200W of output in a chassis that is almost unrivaled for size and performance. Featuring a newly updated PCB that has a 360 khz High Speed Synchronous DC-DC Control and a peak efficiency higher than 97%, the KBOX 200W is a highly efficient and powerful output device. With an extended range of 7 to 200W in standard output wattage mode alongside a 0.1 ohm minimum atomizer resistance, the KBOX 200W is one of the most compact, high performance devices in its form factor class. Onboard temperature control features support for Ni200 Nickel, Titanium, Stainless Steel, and Nichrome heating elements, with a 0.05 ohm minimum atomizer resistance for the first three, and 0.1 ohm minimum atomizer resistance range for Nichrome. The PCB also regulates temperature at 1000x per second, resulting in superior temperature accuracy. The chassis is constructed out of light and sturdy Zinc Alloy and Aluminum, utilizing a dual magnetized battery access door for easy access for the series run batteries (sold separately). Featuring an outstanding new PCB that results in superior performance and reliability, the Kanger KBOX 200W TC Box Mod is the flagship high performance device in Kanger's storied device heritage.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 7 to 200W Range
- 0.1 ohm Minimum Atomizer Resistance
- 0.1W Adjustment
- 9V Maximum Output
- Temperature Control Module
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Suppport
- 0.05 ohm Minimum Atomizer Resistance
- Nichrome Support
- 0.1 ohm Minimum Atomizer Resistance
- Regulates 1000x Per Second for Superior Accuracy
- 200 to 600 Degrees Fahrenheit
- Upgraded PCB
- 360 kHz High Speed Synchronous DC-DC Control
- Peak Efficiency Higher Than 97%
- Ultra Low Output Ripple
- Magnetized Battery Access Door
- Two High Amperage 18650 Batteries in Series (sold separately)
- Smart Balancing Charger
- Recognizes and Regulates Charging Speed
- Gold Plated Spring Loaded 510
- LCD Display Screen
- Two Line Display
- Atomizer Resistance
- Output Wattage
- Output Temperature
- Output Voltage
- Battery Life Indicator
- Zinc Alloy and Aluminum Construction
- Low Battery/Short Circuit/Open Circuit/Overtime Protection
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.