Pioneer4you iPV 400 200W Subcompact Box Mod
Pioneer4you's iPV 400 is the latest box mod platform from one of the most tried and true manufacturers in our industry, focused on creating one of the best size to performance ratios in our industry, with a 200W maximum output, a subcompact form factor, and a dual battery power source. Integrating YiHi's SX330 F4 chipset, the iPV 400 features flagship level performance output, with a wattage range of 10 to 200W and a minimum atomizer resistance of 0.15 ohms. Temperature control and SX Pure compatible output is available out of the box, with a 10 to 120J output range and a 212 to 572 degree Fahrenheit range. Ni200 Nickel, Titanium, and SS304 heating elements are also supported alongside an adjustable TCR output between 0.00050 to 0.00700 units. Despite the powerhouse output, the iPV 400 is designed as efficiently and ergonomically as possible, measuring 88mm by 41.5mm by 28mm in dimensions, with a vertical based chassis that is comfortable to hold and maneuver. The firing button is positioned alongside the rounded curve at the top of the chassis, while the two line OLED display sits side by side with the two adjustment buttons. Two 18650 high amperage batteries (sold separately) can be loaded from the base of the chassis, with the battery bay utilizing a sliding and spring loaded locking system. Focusing on providing an affordable, ergonomic, and high performance platform, Pioneer4you's iPV 400 is their current crowning achievement in budget orientated performance devices, providing excellent versatility at an incredible price point.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- YiHi SX330 F4
- 10 to 200W Output Range
- 0.15 to 3.0 Atomizer Resistance Range
- Output Voltage 1.0 to 7.0V
- Output Current 1.0 to 45.0A
- Temperature Control and SX Pure Output
- Ni200 Nickel Support
- Titanium Support
- SS304 Support
- SX Pure Output
- Adjustable TCR Output
- 10 to 120J Range
- 0.05 ohm Minimum Atomizer Resistance
- 212 to 572 degrees Fahrenheit Range
- 100 to 300 degrees Celsius Range
- Dual Battery Powered
- Sliding and Spring Loaded Battery Access Door
- Accepts Two High Amperage 18650 Batteries
- Two Line OLED Display
- Output Power/Joule/Temperature
- Output Voltage
- Atomizer Resistance
- Battery Life Indicator
- Ultra Compact Form Factor
- Stainless Steel Thread Point
- Gold Plated 510 Connection
- Low Voltage/Low Resistance/High Input/Output Short Circuit/Reverse Battery/Overheating Protection
- One iPV 400 Box Mod
- One Micro USB Cable
- One User Manual
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.