Pioneer4you iPV 6X 200W Large Screen Subcompact Box Mod
Pioneer4you's iPV 6X is the large screen variant of the iPV 400 box mod platform, repositioning the screen and adjustment buttons for easier use while maintaining the compact chassis. Integrating YiHi's SX330 200 chipset, output of the iPV 6X sits alongside Pioneer4you's top two battery performance devices, with an output range of 10 to 200W, an atomizer resistance range of 0.15 to 3.0 ohms. Temperature control and SX Pure compatiblility output is available out of the box, with a 10 to 120J output range and a 212 to 572 degree Fahrenheit range. Ni200 Nickel, Titanium, and SS304 heating elements are also supported alongside an adjustable TCR output between 0.00050 to 0.00700 units. Maintaining the overall size and chassis design of the iPV 400, the iPV 6X moves towards a more minimalist look, featuring a more prominent colored chassis. The control face and enlarged screen are aligned vertically down the midpoint of the device, improving one handed use and adjustment. The larger OLED display now features a three line display, while increasing brightness for added visibility. Two 18650 high amperage batteries (sold separately) can be loaded from the base of the chassis, with the battery bay utilizing a sliding and spring loaded locking system. Intended to unseat the iPV 400 platform with better ergonomics and an improved screen, Pioneer4you's iPV 6X offers one of the best performance profiles for the size and price.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- YiHi SX330-200
- 10 to 200W Output Range
- 0.15 to 3.0 Atomizer Resistance Range
- Output Voltage 1.0 to 7.0V
- Output Current 1.0 to 45.0A
- Temperature Control and SX Pure Output
- Ni200 Nickel Support
- Titanium Support
- SS304 Support
- SX Pure Output
- Adjustable TCR Output
- 10 to 120J Range
- 0.05 ohm Minimum Atomizer Resistance
- 212 to 572 degrees Fahrenheit Range
- 100 to 300 degrees Celsius Range
- Dual Battery Powered
- Sliding and Spring Loaded Battery Access Door
- Accepts Two High Amperage 18650 Batteries
- Three Line Large Screen OLED Display
- Output Power/Joule/Temperature
- Output Voltage
- Atomizer Resistance
- Battery Life Indicator
- Ultra Compact Form Factor
- Stainless Steel Thread Point
- Gold Plated 510 Connection
- Low Voltage/Low Resistance/High Input/Output Short Circuit/Reverse Battery/Overheating Protection
- One iPV 6X Box Mod
- One Micro USB Cable
- One User Manual
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.