One of the best kept secrets in the industry, the Project Sub-Ohm™ Edition Agent Mod by Conspiracy Inc can handle up to 110 watts! Get in on the conspiracy!
Made in the USA
Introducing the Project Sub-Ohm™ Edition Agent 110 Watt Box Mod by Conspiracy Inc, a variable voltage device that can handle up to 110 watts in a sleek, svelte box! Blacked out and engraved with Conspiracy Inc's signature emblems, the Project Sub-Ohm™ Edition Agent features a slick exterior backed by a clean interior. Running dual 18650 batteries in series, the Project Sub-Ohm™ Edition Agent utilizes the OKL-T/20 chip to provide a high efficiency variable voltage output from 3.5 to 5.5 volts. Firing down to .27 ohms at max voltage, the OKL-T/20 chip can be run up to a max capacity of 20 amps and 110 watts safely. The magnetized door gives way to a easy-read battery tray, finished with brass contact points. The 510 utilizes a spring-loaded brass contact ensuring consistent battery contact and hassle free flush fitting. The potentiometer is located externally with artistically placed Conspiracy Inc engraving providing easy adjustment. Join the Conspiracy. The Project Sub-Ohm™ Edition Agent Mod by Conspiracy Inc.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- OKL-T/20 Chip can handle up to 110 watts and 20 amps
- Fires down to .27 ohms at max voltage
- 3.5 to 5.5 volts
- Easy to use dialed potentiometer for voltage adjustment
- Spring-loaded brass contact
- Matte Black and engraved with Conspiracy Inc signature emblems and iconic Project Sub-Ohm™ Logo
- Stainless Steel High Click Switch
- Individually serialized
- Utilize ONLY 20 Amp or higher IMR/INR Batteries!
- Used paired batteries (same make and manufacturer) at all times!
- Do NOT go above manufacturer recommended amperage or wattage limits!
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.