Home > Rebuildables > Rebuildable Dripping Atomizers (RDA) > $20 - $50 RDAs >

  Project Sub-Ohm® Edition Black Doge RDA V2 by Congrevape (Limited Edition)
Project Sub-Ohm Black Doge RDA V2 by Congrevape


 
Alternative Views:


Our Price: $39.99

Stock Status: (Out of Stock)

Product Code: PSO200

Save on Flavor of the Week

  
Save on Batteries

  
Save on Chargers

  
Save on Wicks

  
Save on Wires

  
Save when buy together

VaporDNA™ Edition Unicorn Refillable E-Juice Bottle (30ml) [Add $1.25]

Coil Master 521 Tab Mini Elite Ohm Meter [Add $18.99]

Black Coil Magician Automatic Coil Jig [Add $28.99]

Coil Master Ceramic Tweezer [Add $8.99]

VaporDNA™ VapeBand™ [Add $1.49]

Qty:  
Description
 
More Elegant! More Refined! More Post Hole Size! More Clouds! The Competition Doge V2 Is a Complete Redesign of the Original Doge to Do One Thing: Blow Clouds! Now Available in Project Sub-Ohm™ Limited Edition Black!

Designed in USA (Project Sub-Ohm™ x Congrevape)

Improvements Over Original Doge RDA:
  • Overall look has changed, the top cap is now more stylish, blends with the body seamlessly. A Watchface Design
  • The Post Holes are gigantic, measures at 3mm versus the 1.8mm in the original Doge RDA
  • An innovative Air Injection Hole is installed to cool down vapor and to increase expansion inside of the tip
  • Slimmed down 14mm competition tip, one of the widest we have seen on any RDA
  • Airflow kept the same as the original Doge RDA, measuring at 11mm x 2.5mm air intake slots, and fully adjustable
  • M3 Screws are used, in both C110 Lead Free Copper and SS included
  • Large deep flat head screws to prevent stripping
  • Keyed Center Posts, which will not spin, in both SS and C110 Lead Free Copper
  • 5 Times Larger Insulator
  • 1mm deeper juice well than original Doge
  • Three Piece Peek insulator
Product Features:
  • Watchface design
  • Machined out of Black Coated 304 Stainless Steel
  • Innovative Air Injection cools vapor and increases expansion inside the tip
  • Slimmed down 14mm competition tip
  • Barrel is same winning 11mm x 2.5mm air intake slots, that are fully adjustable
  • Cap featuers single airflow option like previous caps
  • 3mm post holes vs 1.8mm of the original Doge RDA
  • M3 Screws, in both C110 Lead Free Copper and SS included
  • Large deep flat head screws to prevent stripping
  • Keyed center post, that will not spin, both in SS and C110 Lead Free Copper
  • 5 times larger insulator than the original Doge
  • V3 Top Cap fits on V1 Doge
  • Three piece peek insulator
  • Beautifully Engraved with Signature Project Sub-Ohm™ Logo on one side, Brand New Doge Logo on the other side
  • Designed in USA
Advanced User Item. Use at Your Own Risk!

***Be sure to clean your atomizer before use.
***For Use With 30 Amp or More IMR Batteries Only!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.

Average Rating: 5 of 5 Total Reviews: 12 Write a review »

  0 of 0 people found the following review helpful:
 
Doge V2 RDA March 1, 2015
Reviewer: Jeremy Joubert from North Waterboro, ME United States  
Best value RDA for the money as far as I'm concerned. Project Sub-Ohm and Congrevape hit a home run on this beauty.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
the shiznit March 1, 2015
Reviewer: Kyler Alcorn from San Diego, CA United States  
Love the rda. Shits bOSS in black. Loved it so much I own the silver and black one

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Wow! Such atomizer. Very cloud...but smallish deck February 14, 2015
Reviewer: Mark Schilleman from Bremerton, WA United States  
Positive: square-keyed center post is an absolute godsend. It does what it claims to do and keeps that post from spinning. 3mm post holes are far more than I think I'll ever need for building...might be time to try my dual-quad-parallel-22ga build that no other atty I've seen besides the Mephisto would have fit. I think they've finally got the chuff diameter figured out. It just kinda feels like the perfect size and I haven't seen any huge loss of airflow between the DogeX and V2. Flavor is still excellent. But ONE con: the lack of build space. Those familiar with the DogeX will find themselves a bit more cramped in terms of what they can fit length-wise on their coils. My first few builds on this atomizer were nothing short of frustrating as I would constantly be hitting a coil wrap or the wick when applying the cap. It's one negative to an otherwise brilliant, cheap authentic atomizer. Oh, and VaporDNA, looks like you skipped past my order notes. Never got my bottle of MP juice :(

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
good RDA February 13, 2015
Reviewer: Aaron from BONITA, CA United States  
Its my new favorite RDA  now i want to get a WHITE  one next

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Doge V2 February 11, 2015
Reviewer: Steve from Saint Charles, IL United States  
At first I did not think I would like the bore of the non changeable mouth piece. But it is just a very well thought out design. This is not for flavor really. Just for cloud chasers. I just wanted the project sub ohm in my arsenal of RDA'S.

Was this review helpful to you?

View All Customer Reviews