Project Sub-Ohm™ Edition Atty Cubed RDA by Wotofo is the essential box mod specific rebuildable dripping atomizer, manufactured out of 304 Stainless Steel, massive airflow, split terminal design, and an included broadcap for a fantastic flavor and vapor producing RDA!
Project Sub-Ohm™ x Wotofo
The Project Sub-Ohm™ Edition Atty Cubed RDA by Wotofo is the essential box mod specific RDA, combining a very strong feature set, high quality machining, and a box mod centric form factor. The Atty Cubed features a split positive center post and deck-milled negatives, with each post hole measuring 2mm in diameter. Coupled with a 6mm deep juice well, the Atty Cubed can accommodate a wide variety of build configurations. Airflow is designed as dual staggered airslots, each measuring 7mm by 2mm, allowing absolutely tremendous airflow. Paired with the specifically designed top cap that allows for the opening and closing of each airslot, airflow can be throttled up and down for any particular preference. A Wotofo Threaded Broadcap features a delrin competition ultrabore of 11mm, with a traditional 510 adapter included to allow for traditional drip tips. Manufactured out of the 304 Stainless Steel, the Atty Cubed also features German made PEEK insulators, maximizing heat resistance to withstand the most strenuous builds. The perfect pairing with your box mod. The Project Sub-Ohm™ Edition Atty Cubed by Wotofo.
- Unique Box Mod Centric Design and Form Factor
- Split Center Post with 2mm Post Holes
- Deckmilled Negative Posts with 2mm Post Holes
- 6mm Deep Juice Well
- Dual Staggered Airslot Airflow
- Stagger Cut Airflow Adjustable Top Cap
- 11mm Ultrabore Broadcap
- 510 Adapter
- German Made PEEK Insulator
- 304 Stainless Steel
- Silver Plated Contact
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.