Home > Rebuildables >

Project Sub-Ohm® Edition Bullet RDA by Sparkle (Infinite's Cloud Chaser's Dream)
Project Sub Ohm Edition Bullet RDA by Sparkle

Alternative Views:

Our Price: $34.99
Sale Price: $29.99
Savings: $5.00

Stock Status: (Out of Stock)

Product Code: PSOBU1

Save on Flavor of the Week

Save on Matching Drip Tip

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when buy together

VaporDNA™ Edition Unicorn Refillable E-Juice Bottle (30ml) [Add $1.25]

Coil Master 521 Tab Mini Elite Ohm Meter [Add $18.99]

Black Coil Magician Automatic Coil Jig [Add $28.99]

Coil Master Ceramic Tweezer [Add $8.99]

VaporDNA™ VapeBand™ [Add $1.49]

The Project Sub-Ohm™ Edition Bullet RDA by Sparkle is a dazzling combination of features that cater to the absolute cloud chasing enthusiasts, integrating PEEK, 303 Stainless Steel, Innovative Airflow Discs, and Massive Airflow!

Powered by Infinite!

The Project Sub-Ohm™ Edition Bullet RDA by Sparkle is the culmination of Infinite's design house in the creation of a true cloud chasing RDA, combining extremely heat resistant and heat dissipating PEEK, 303 stainless steel, airflow altering discs, and massive airflow options. First and foremost in the design is the utilization of PEEK, a highly heat resistant material, in the Bullet's insulators, base and in the airflow discs. This ensures not only a durable and heat resistant platform, but also severely reduces heat travel from the deck. PEEK is also featured prominently in the two airflow discs strategically placed and patterned in the upper chamber, acting both to create turbulence and a typhoon effect in the airflow for fantastic flavor and vapor production as well as an extremely effective spitback protection system. The Project Sub-Ohm™ Edition Bullet RDA also features square deckmilled negative posts, and a square large posthole no-turn positive post to effectively run the most demanding builds. Airflow capability is staggering, featuring up to 12 airflow settings and a maximum total of over 90 mm of area for airflow into the deck! To accompany this, the Bullet features an ultra bore competition top, tapering to the smallest point to an enormous 18 mm. Manufactured out of 303 Stainless Steel and engraved with the iconic Project Sub-Ohm™ logo, the Bullet RDA features a Copper contact for top level conductivity. Designed from the ground up for the most demanding cloud chasers. The Project Sub-Ohm™ Edition Bullet RDA by Sparkle.

Product Features:
  • PEEK Airflow Discs are specifically and strategically placed and patterned to induce a typhoon swirling effect
  • Verticle Slotted Adjustable Airflow can be adjusted in 12 distinct variations, with a maximum airflow allowance measuring over 90 mm
  • Ultra bore competition top measures 18 mm
  • Deckmilled square negative posts and square positive post eliminates spinning
  • PEEK subdeck eliminates heat dissipation
  • PEEK insulators
  • 303 Stainless Steel Construction
  • Copper Contact
  • Iconic Project Sub-Ohm™ Engraved Logo

***Please be sure to clean your atomizer before use

Advanced User Item. Use at Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.

Average Rating: 4.5 of 5 Total Reviews: 18 Write a review »

  0 of 0 people found the following review helpful:
Great August 13, 2015
Reviewer: Blaze martin from Tuscola, TX United States  
Cloud chasing atty all the way! Be careful it will get hot but i use the adapter and use a wide bore drip tip which eleminates that problem.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Excellent RDA but... August 3, 2015
Reviewer: Matthew L from Longmont, CO United States  
This thing is a beast. However there were a couple things that extremely put me off by it.
First, ordering here, the "matching" drip tips are 510, to be used with the adapter this Bullet comes with. Which is fine, after about 45 minutes of extreme hassle. Removing the peak airflow discs were amazing difficult. I literally snapped the screwdriver it comes with, and a drill bit I had to turn to. Eventually I managed to get both (the smaller one proved to be hardest) removed to install the 510 drip tip adapter.
Then I had to take that 510 drip adapter out to ye ol' grinding wheel and shave off a MM or two to get both it, and the smaller peak disc to get both installed into the inner barrel's threading.
After a fashion, I am thoroughly enjoying this guy though. Amazing performance, and the price is just as amazing. I was just scared I was going to break those discs getting them out, they were put in wayyyy too damn tight!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Highly recommended July 29, 2015
Reviewer: Ryan Andry from Buzzards bay, MA United States  
If you're looking to chase some clouds, this is a must have.
Great airflow, easy deck to build on, and it stays pretty cool (even when chain vaping).
The price is just awesome for how good this RDA is. They could charge twice this, and I would have paid it, if I knew it was this good.
The PEEK air flow discs do their job, and serve a secondary function of not allowing hot juice to spit up through the very large tip. Long story short, buy one.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Nice RDA July 21, 2015
Reviewer: Walt Hampton from Nashville, TN United States  
Generally good flavor and decent cloud production.  Overall generally well put together with the exception of the threading on the various plastic components, have to work the threads over and over to get them to finally work smoothly, I think the threads could be cleaner at the start. Only other issue is this sucker does get really hot during use.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Good clouds July 13, 2015
Reviewer: Matt from Cranston, RI United States  
This is my first cloud chasing atty and I'm impressed. Fairly easy to build on and also has decent flavor.
Also looks great on my Manhatten mech mod.

Was this review helpful to you?

View All Customer Reviews