Project Sub-Ohm® Edition Mutank Two Post RTA Base
Project Sub-Ohm® x Indulgence
The Project Sub-Ohm® Edition Mutank Two Post RTA Base is an essential addition to the Mutank (sold separately) ecosystem, giving users the ability to use one of the most popular deck configuration styles to date, with a two post split assembly that features two 1.5mm diameter terminals per post, cutaway bases for ample wicking space and four 5mm by 3mm wicking ports. With a unique spin on the two post deck style, the RTA Base features a cleverly designed split assembly that has a primary PEEK insulator as well as an auxiliary PEEK insulator. Each post features two 1.5mm terminals secured by flathead keyed grub screws, making coil setting and configuring practical and efficient. The center pin features silver plating for high conductivity, while the base is manufactured out of 304 Stainless Steel. Practical and cost effective, the Project Sub-Ohm® Edition Mutank Two Post RTA Base is a key addition to the Mutank ecosystem.
Warning: Please Meter Out Assembly and Ensure NO Shorts Before Firing
- Official Two Post RTA Base of the Project Sub-Ohm® Edition Mutank
- Split Design Two Post Build Deck
- Four 1.5mm Post Terminals
- Side Tension Applied Flathead Screws
- Easy Coil Setting
- Wide Capability
- PEEK Insulators
- Four 5mm by 3mm Wicking Ports
- Enormous Wicking Potential
- Full Cutaway Deck
- 5.3mm by 3.2mm Airflow
- Single Coil Adapter
- Silver Plated Center Pin
- 304 Stainless Steel
- Iconic Project Sub-Ohm® Engravings
- One Project Sub-Ohm® Edition Mutank Two Post RTA Base
- 8 Flathead
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm® is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.