Home > Rebuildables >

Project Sub-Ohm® Edition Vector RDA by Vulcan (The Definition of Innovation and Affordability)

Project Sub-Ohm Edition Vector RDA by Vulcan

Images are for illustration purposes only. Actual color, finish and packaging may vary.

Our Price: $64.99
Clearance Price: $9.99
Savings: $55.00

Stock Status: (Out of Stock)

Product Code: PSOVEC

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when purchased together

Coil Master Spinner 1 - SS [Add $8.99]

Avatar VapeNut Vapor Eliminator [Add $109.99]

Chubby Gorilla E-Liquid Bottle (30ml) [Add $1.49]

Coil Master 521 Tab Mini Ohm Meter [Add $18.99]

GeekVape Essential Tool Kit [Add $7.99]

Coil Master Ceramic Tweezer [Add $8.99]

The Project Sub-Ohm™ Edition Vector RDA by Vulcan combines the hallmark precision and quality known from Vulcan with a new eight vertical air intake system, a spin proof center post, and a new anti spitback protection system!

Project Sub-Ohm™ X Vulcan (Made in Japan)

The Project Sub-Ohm™ Edition Vector RDA by Vulcan is the next evolution from the acclaimed manufacturer of the worldwide smash that was the Vulcan RDA. Introducing a new, fully adjustable 8 vertical air intake system, each hole is precisely angled and aligned to directly deliver to each coil structure, sending a focused airstream onto and around each coil. This creates a phenomenon which results in excellence in flavor and vapor production. In addition, this design inherently results in a highly leak resistant system, removing the hassle of ensuring constant verticality in regards to the RDA. The top cap features an 11mm widebore drip tip along with the airflow adjustment, allowing from single to eight airhole options, coupled with a mesh spitback filtration system. The deck features deck milled cutaway negative posts along with a new 'Squircular' center post base, designed to accommodate a 3mm post hole while giving the most deck space possible. Manufactured out of 303 Stainless Steel, PEEK insulators, a pure red copper contact and engraved with our iconic logo, The Project Sub-Ohm™ Vector RDA is the culmination of many months of design and tweaking by one of the premiere design and manufacturing houses in the industry.

Product Features:
  • 8 Fully Adjustable Vertical Air Intake System For Unparallelled Flavor and Vapor
  • 11mm Widebore AFC Drip Cap
  • Leak-Free Design
  • Spitback Prevention System
  • 3mm Post Holes
  • Deckmilled Cutaway Negative Post
  • 'Squircular' Center Post base
  • 303 Stainless Steel Construction
  • PEEK Insulator
  • Pure Red Copper Contact
  • Iconic Project Sub-Ohm™ Engraving

Product Includes:
  • Vulcan Magnetized Display Case
  • Allen Key
  • 3 Allen Screws
  • Extra Spitback Grille
  • Extra O-Rings

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use At Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.

Average Rating: 4.5 of 5 Total Reviews: 11 Write a review »

  0 of 0 people found the following review helpful:
Solid RDA December 4, 2017
Reviewer: Zac B from Greeley, CO United States  
Clean Project Sub Ohm engravings on the RDA, and I love the metal filter that prevents juice from spitting up into your mouth. Build deck is a tiny bit more narrow than I would prefer for a 3 post, but solid nonetheless.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Good thing I got one. December 3, 2017
Reviewer: VapingJim from Moreno Valley, CA United States  
It's a gem..for me.thanks VaporDNA

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Vector works nice June 14, 2017
Reviewer: Mason Routhier from Thunder bay, ON Canada  
I like the vector everything is smooth. Top piece has to be on a certain way or effects taste an clouds. Overall happy with purchase

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Very nice looking RDA March 10, 2016
Reviewer: Nicholas Brungard from Highspire, PA United States  
3 post rda's are not my favorite. If it were a 4 post or good 2 post I would LOVE it. Airflow is great, good flavor, and really good looking. Would look great on one of those wee lil mech mods because it is relatively short. I use it on my efusion DNA 200. Another complaint is the grub screws are a little loose in the threading of the posts. Once I tightened them down on my coils it was no problem.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
One of my go to RDA's right now July 18, 2015
Reviewer: Kevin from Honolulu, HI United States  
Love the non leak design made with very light yet sturdy materials. It's definitely crafted with quality.

My high VG juices tend to clog up the net causing it to heat up without producing much vapor at all, so I just removed the net and it hits really good now.  I don't really get spit backs without the net either so its all good!

Was this review helpful to you?

View All Customer Reviews