Project Sub-Ohm® Edition Mutation xB 60W TC Box Mod by Indulgence
Made by Indulgence, Unicig
The Project Sub-Ohm® Edition Mutation xB 60W TC Box Mod is a fully featured device, following the legacy of the Mutation X series which is renown in producing some of the most innovative, high quality, and affordable products in the industry. Following in suit with the legacy laid by the Mutation X Series, the Mutation xB brings the same innovation, functionality, and affordability into reality. Featuring 7 to 60W of wattage output, temperature control up to 599 degrees Fahrenheit, a resistance range of 0.1 to 3.0 ohms, and a sliding magnetized door that makes the 18650 battery (not included) simple and easy to replace, the Mutation xB is another premier product in the legacy.
Coming in four finishes, the Mutation xB showcases the signature Mutation X series airflow, adding a stylistic element while doubling as a battery vent hole. The chassis features a svelte and soft curve with the sliding door opposite, with the sliding door featuring the Project Sub-Ohm® markings as well as the special serial run for the Mutation xB. The Project Sub-Ohm® logo is featuring prominently on the lower left face of the xB. The front face holds the OLED Display, with battery life, output wattage, output temperature, and atomizer resistance readouts. The 510 features a crosshatched design for bottom fed airflow, with a gold plated spring-loaded 510 connection making battery adjustment and flush fitting easy and hassle free. The xB's output features dual mode wattage and temperature outputs, allowing for 7 to 60W of wattage alongside 212 to 599 degrees Fahrenheit (Celsius based output also integrated).
With a feature set and design that the Mutation xB brings, it is a testament to the consistent ability of Indulgence and Unicig to provide all of these to the end user at an ultra competitive price, placing it among some of the top performers in it's segment. Compact, stylish, ergonomic, and at an incredible price, the Project Sub-Ohm® Edition Mutation xB 60W TC Box Mod is a full featured device at an entry level cost.
- 7 to 60W of Output
- 0.1 to 3.0 ohm Resistance Range
- .1W Adjustment Increments
- 299 to 599 Degrees Fahrenheit/100 to 315 Degrees Celsius
- Allows for Resistance to be Set and Locked
- Adjustable in Increments of 1
- Two Line OLED Screen
- Battery Life
- Output Wattage
- Output Temperature Readout
- Three Button Design
- Clean and Elegant Design
- Flat Face with Soft Curvature
- Micro USB Charging Port Located at Base
- Dual Magnetized Sliding Door
- Single 18650 (not included)
- Low Voltage/Reverse Polarity/Overcharge Protection/Short Circuit Protection/Overtemperature Protection
- Iconic Project Sub-Ohm® Engravings
- Specially Serialized Run
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm® is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.