Project Sub-Ohm® Project S80™ SX130H TC Box Mod
100% Solely Designed, Engineered, and Developed in the USA by Project Sub-Ohm™!
The Project Sub-Ohm® Project S80™ TC Box Mod is the newest and most compact entry into the Project Square™ family, integrating the YiHi SX130H chipset, one of the most advanced and proven small form factor boards today that has a power range of 7 to 80W with temperature controlled output for Ni200 Nickel and Titanium heating elements, alongside a rubberized black and red chassis that features a Zinc Alloy construction for a perfect balance between durability and handling. The S80™ carries on the heritage of Project Square® box mods, combining the benchmark YiHi SX130H chipset with the quality and design of Project Sub-Ohm® to create a class leading compact form factor box mod.
With an emphasis on creating a well balanced chassis that maintains a durable structure while also having great weight balance, the S80® is manufactured out of high grade Zinc Alloy in regards to the chassis. A soft rubberized coating is then applied upon the exterior clam shell design, combining with the softly curved and sweeping back to create a comfortable and non fatiguing chassis. With an emphasis on creating a sleek and unbroken look, the rubberized clam shell is kept a clean, sleek black, moving towards a more minimalist approach. The control face, keeping in line with the signature color trims of YiHi powered Project Square® box mods, features a deep and rich crimson and carmine hue contrasted with black control buttons, creating a bold and striking look. The enlarged firing button features the Project Sub-Ohm® engraving and is followed by the adjustment buttons and screen, creating a neatly organized, easily accessible, and aesthetically pleasing look. The bezel measures 24mm in diameter, allowing for a wide range of compatibility with standardized atomizer sizes, while a Stainless Steel disc threadpoint ensures durability. The 510 connector is 24K Gold Plated and spring loaded, ensuring strong conductivity and snug fitting. The battery compartment is accessible via unscrewing the engraved steel disc, with both knurling and a coin slot sized slot allowing users to remove the disc with their preferred method. Inside, a spring loaded 24K Gold Plated contact ensures good conductivity and accommodates a single 18650 high amperage battery (sold separately).
The S80™ carries on the tradition of Project Square® box mods by utilizing a YiHi SX130H V4.6A. The SX130H is currently one of the industry's premiere single battery, small form factor chipsets today, featuring a efficient, accurate, and consistent output range of 7 to 80W. The marquee factor of the YiHi SX130H is its performance in temperature control mode, providing one of the best overall temperature controlled outputs in the small form factor class. Used in tandem with the two Project Sub-Ohm® Edition Mutank Sub-Ohm Tank System, the Project Sub-Ohm® SilverPlay™ family, and many of today's most popular Sub-Ohm Tanks, RTAs, and RDAs, the Project Sub-Ohm® S80™ is truly a elite class level platform offered at an incredible price point.
- High Grade Zinc Alloy Construction
- Signature Project Sub-Ohm® Colorway
- Black Rubberized Clam Shell Chassis
- Crimson and Carmine Center Body
- Engraved Firing Button
- Three Button Control Face
- Compact and Ergonomic Design
- Softly Curved and Sweeping Chassis
- Fits Comfortable in Hand
- Well Balanced Weight Distribution
- 24mm Bezel Diameter
- Custom Flashed YiHi SX130H V4.6A 80W TC Chipset
- 7 to 80W Output Wattage
- 3.6 to 7V Output Voltage
- 0.2 Ohm Minimum Atomizer Resistance
- 0.69" OLED Screen
- One of the Most Trusted Names in Output Chipboards Today
- Two Line Screen
- Temperature Controlled Output
- 0.05 ohm Minimum Atomizer Resistance
- 10 to 50J Output
- Ni200 Nickel Support
- Titanium Support
- 212 to 572 Degrees Fahrenheit
- Project Sub-Ohm™ Introduction Greeting
- 24K Gold Plated Positive Battery Contact
- Stainless Steel Coin Slotted Battery Access Disc
- Quad Vent Hole Design
- Dual Angle Engravings
- 24K Gold Plated Brass 510 Contact
- Spring Loaded Pin
- Stainless Steel 510 Threadpoint
- Utilizes One 18650 High Amp Battery (Sold Separately)
- Iconic Project Sub-Ohm® Logo
- Project S80™ Logo Engraved On
- 100% Solely Designed, Engineered, and Developed in the USA by Project Sub-Ohm®!
- One Project Sub-Ohm® Project S80™ TC Box Mod
- Elegant Project S80™ Box
- Barrel Jack to USB Charging Cable
- User Manual
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm® is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.