Home > Rebuildables > Rebuildable Dripping Atomizers (RDA) > $20 - $50 RDAs >

  Project Sub-Ohm® Edition SS Doge RDA V2 by Congrevape (Limited Edition)
Project Sub-Ohm SS Doge RDA V2 by Congrevape


 
Alternative Views:


Our Price: $39.99

Stock Status: (Out of Stock)

Product Code: PSO201

Save on Flavor of the Week

  
Save on Batteries

  
Save on Chargers

  
Save on Wicks

  
Save on Wires

  
Save when buy together

VaporDNA™ Edition Unicorn Refillable E-Juice Bottle (30ml) [Add $1.25]

Coil Master 521 Tab Mini Elite Ohm Meter [Add $18.99]

Black Coil Magician Automatic Coil Jig [Add $28.99]

Coil Master Ceramic Tweezer [Add $8.99]

VaporDNA™ VapeBand™ [Add $1.49]

Qty:  
Description
 
More Elegant! More Refined! More Post Hole Size! More Clouds! The Competition Doge V2 Is a Complete Redesign of the Original Doge to Do One Thing: Blow Clouds! Now Available in Project Sub-Ohm™ Limited Edition Stainless Steel Finish!

Designed in USA (Project Sub-Ohm™ x Congrevape)

Improvements Over Original Doge RDA:
  • Overall look has changed, the top cap is now more stylish, blends with the body seamlessly. A Watchface Design
  • The Post Holes are gigantic, measures at 3mm versus the 1.8mm in the original Doge RDA
  • An innovative Air Injection Hole is installed to cool down vapor and to increase expansion inside of the tip
  • Slimmed down 14mm competition tip, one of the widest we have seen on any RDA
  • Airflow kept the same as the original Doge RDA, measuring at 11mm x 2.5mm air intake slots, and fully adjustable
  • M3 Screws are used, in both C110 Lead Free Copper and SS included
  • Large deep flat head screws to prevent stripping
  • Keyed Center Posts, which will not spin, in both SS and C110 Lead Free Copper
  • 5 Times Larger Insulator
  • 1mm deeper juice well than original Doge
  • Three Piece Peek insulator
Product Features:
  • Watchface design
  • Machined out of 304 Stainless Steel
  • Innovative Air Injection cools vapor and increases expansion inside the tip
  • Slimmed down 14mm competition tip
  • Barrel is same winning 11mm x 2.5mm air intake slots, that are fully adjustable
  • Cap featuers single airflow option like previous caps
  • 3mm post holes vs 1.8mm of the original Doge RDA
  • M3 Screws, in both C110 Lead Free Copper and SS included
  • Large deep flat head screws to prevent stripping
  • Keyed center post, that will not spin, both in SS and C110 Lead Free Copper
  • 5 times larger insulator than the original Doge
  • V3 Top Cap fits on V1 Doge
  • Three piece peek insulator
  • Beautifully Engraved with Signature Project Sub-Ohm™ Logo on one side, Brand New Doge Logo on the other side
  • Designed in USA
Advanced User Item. Use at Your Own Risk!

***Be sure to clean your atomizer before use.
***For Use With 30 Amp or More IMR Batteries Only!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.

Average Rating: 4.5 of 5 Total Reviews: 15 Write a review »

  0 of 0 people found the following review helpful:
 
Really like the Doge V2. March 9, 2015
Reviewer: Anonymous Person from Dayton, OH United States  
Great RDA! Love the size of the post holes but their size also limits some builds as there isn't enough room on the deck. I can just get a 7 wrap 22 gage dual parallel around a 3mm to fit. With such large post holes, you would want to use some lower gage wire but can't because the deck isn't big enough to build a safe coil with out effecting ramp up speed. Still 4 out of 5 stars for great build quality and amazing air flow.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good rda March 7, 2015
Reviewer: paolo page from Winnemucca, NV United States  
I have it on my Hana mod. Wish the single air hole was a little bigger. Big on clouds. Not as much flavor as the kennedy

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
awesome March 5, 2015
Reviewer: jonathan judge from Watertown, MA United States  
Great atty over all nevermind the low price

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great rda March 1, 2015
Reviewer: John Powers from Mt Airy, NC United States  
One of my favorite rdas to date, nice large post holes and plenty of airflows for those super sub ohm builds

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
excellent construction, tight orings February 28, 2015
Reviewer: Jeremy Ricketts from Tiger, GA United States  
everything was very well machined with no machine oil upon receiving the device. All the extras were included, o-rings center post peek insulators. one of the stainless screws in my bag was actually broken but had already had a replacement screw added to the pack to cover it. I love the way everything on it works the air flow is perfect the mouthpiece is very comfortable and not as sharp as I thought it was going to be the flavors better than my mutation xv1 and I have had no sooner posts spinning even using 18 gauge builds. but the o-rings connecting the deck to the barrel are extremely hard to get on even when lubed with juice. overall a fantastic product with fantastic engravings and fantastic functionality

Was this review helpful to you?

View All Customer Reviews