Project Sub-Ohm® SwirlFish™ V2 RDA
100% Solely Designed, Engineered, and Developed in the USA by Project Sub-Ohm®!
The Project Sub-Ohm® SwirlFish™ V2 RDA is the newest iteration of the SwirlFish™ RDA, integrating a new Swirl Top Easy Drip System, a threaded, adjustable airflow deck shield, a new array of airflow options, an a shortened overall height as compared to the original. One of the marquee features of the SwirlFish™ V2 is the Swirl Top Easy Drip System, featuring a hinged locking top cap that is accessed using the finger notch or through a correctly fitted 510 drip tip, opening up for easier access for dripping. This easy to use feature allows for hassle free and accurate dripping particularly geared for everyday use. An embedded O-Ring provides additional friction to ensure consistent and smooth operation.
Airflow has been redesigned, featuring a paired triple diagonal slot and airhole system, with each pair designed with corresponding sizes. Each diagonal slot measures 3mm long, with width increasing from 1mm to 2mm in a right to left fashion. Each paired airhole also increases in size from just under 1mm to 1.5mm, creating a unique and turbulent airflow system specifically designed to increase swirl and airflow disruption. New to the SwirlFish™ V2 is the threaded deck shield, featuring a diagonally cut rounded square pattern, allowing for additional juice well space as well as complete airflow adjustment capability. Deck shield can be removed completely for ease of build.
Building upon the original platform, the SwirlFish™ V2 features a split positive post system paired with deckmilled negative posts, with each posthole measuring 2mm in diameter. This ensures compatibility with a wide range of coil configurations and build types. A new squared PEEK insulator greatly increases heat resistivity and durability. Overall height has been shortened to 25mm, providing a more feature packed system in a more compact package. The SwirlFish™ is manufactured from 304 Stainless Steel to ensure durability, and features Silver Plated Copper Contacts for maximum conductivity. The signature Project Sub-Ohm® logo is engraved into the base of the deck, with the unique serialization run positioned below. Integrating new features to greatly enhance user experience while improving upon form factor, the Project Sub-Ohm® SwirlFish™ V2 RDA is positioned to be an innovative and feature packed RDA in today's market.
- 22mm Diameter
- Swirl Top Easy Drip System
- Embedded O-Ring for Smooth and Consistent Opening and Closing
- Finger Notch
- Triple Diagonal Slot and Airhole Paired System
- Diagonal Slot Measures 3mm with Width Ranging from 1mm to 2mm
- Paired Airhole Diameter Ranges from 1mm to 1.5mm
- Squared and Rounded Threaded Deck Shield
- Independently Controls Airflow
- Increases Juice Well Capacity
- Deck shield can be removed completely for ease of build
- 6mm Standard Setting Juice Well
- Split Positive Positive Post
- 2mm Postholes
- Squared PEEK Insulator to prevent center post from spinning
- Deckmilled Negatives
- 304 Stainless Steel
- Silver Plated Copper Contact
- Iconic Project Sub-Ohm® Logo
- 100% Solely Designed, Engineered, and Developed in the USA by Project Sub-Ohm®!
- One Project Sub-Ohm® SwirlFish™ V2 RDA
- Three Sided Multi Tool
- Two Additional Pairs of O-Rings
- Four Additional Hex Screws
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm® is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.