The Project Sub-Ohm™ "briefcase" TC Temperature Control Edition 50 Watt Box Mod by SMY features a completely redesigned sliding ball locking door, the capability to fire down to 0.1 ohms, and the most affordable dual mode wattage and temperature control systems on the market!
Introducing the Project Sub-Ohm™ "briefcase" TC Temperature Control Edition 50 Watt Box Mod by SMY, featuring a dual wattage and temperature control system, a revamped sliding ball locking door, and the capability to fire down to 0.1 ohms! The Project Sub-Ohm™ "briefcase" TC Temperature Control Edition features a newly integrated Temperature Control module, allowing for the use and adjustment from 200 to 600 degrees Fahrenheit while also including a Wattage system that can range from 5 to 50 watts! A bright, LED screen showcases useful data such as overtime protection settings, puff statistics, battery life, output current, output voltage, resistance, temperature protection and vaping timer. Manufactured out of Zinc Alloy, the Project Sub-Ohm™ "briefcase" TC has been slimmed down from it's predecessors, and features a heavy duty construction. On the back face, the iconic Project Sub-Ohm™ logo is engraved on the back plate, contrasting with the darker tones of the device. Each device is serialized exclusively with a Project Sub-Ohm™ run. The Temperature Control Revolution is here. The Project Sub-Ohm™ "briefcase" TC Temperature Control Edition 50 Watt Box Mod by SMY.
- Temperature Control Module
- 200 to 600 degrees Fahrenheit
- 5 to 50 watt range
- 0.1 to 3.0 ohm resistance range
- LED Screen
- Uses single 18650 IMR battery
- USB Charging Port
- Manufactured out of Zinc Alloy with a Gunmetal Finish
- SS 510 Fittings with Spring-Loaded Positive Pin
- Iconic Project Sub-Ohm™ Engravings
- Individually Serialized
- Short circuit, reverse polarity, temperature, and low voltage protection
- Project Sub-Ohm™ "briefcase" TC Temperature Control Edition 50 Watt Box Mod by SMY
- One Microfiber Cleaning Cloth
- One USB Charger
- User Manual
- Utilize ONLY 20 Amp or higher IMR/INR Batteries!
- 18650 Battery is NOT included!
- In order to use temperature control output, coils must be built using non-resistant wire.
- Do NOT go above manufacturer recommended amperage or wattage limits!
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm™ is a sub-division of VaporDNA™.