Home > Project Sub-Ohm™ >

  Project Sub-Ohm® "flaskmaN"™ SX350J 100W TC by Vapor Flask
Project Sub-Ohm flaskmaN SX350J 100W TC Box Mod by Vapor Flask


 
Alternative Views:


Our Price: $299.99

This product is excluded from certain discount offers.

Stock Status: (Out of Stock)

Product Code: PSOVFX

Save on Flavor of the Week

  
Save on Matching Drip Tip

  
Save on Batteries

  
Save on Chargers

  
Save on Wicks

  
Save on Wires

  
Save when buy together

VaporDNA™ Edition Unicorn Refillable E-Juice Bottle (30ml) [Add $1.25]

Coil Master 521 Tab Mini Elite Ohm Meter [Add $18.99]

Black Coil Magician Automatic Coil Jig [Add $28.99]

Coil Master Ceramic Tweezer [Add $8.99]

VaporDNA™ VapeBand™ [Add $1.49]

Qty:  
Description
 
Project Sub-Ohm® "flaskmaN"™ SX350J 100W TC Box Mod by Vapor Flask

Made in the USA

Vapor Flask x Project Sub-Ohm®

The Project Sub-Ohm® "flaskmaN"™ SX350J 100W TC Box Mod by Vapor Flask is the next evolution of one of the most beloved and trend setting devices in the industry and is now available in an exclusive, highly limited edition featuring the signature colorways of Project Sub-Ohm®. Integrating a custom YiHi SX350J-VF that features one of the most accurate and diverse output capabilities and flexibility in the market, the "flaskmaN"™ is capable of outputting 100W in dual parallel 18650 (sold separately) configuration alongside one of the most sophisticated temperature control and mode selection options in the market. Built on the platform that revolutionized hand ergonomics in devices, the "flaskmaN"™ features the signature black and red trim of Project Sub-Ohm® devices, with the horizontal rocker anodized in a deep, rich red for a visually striking effect. The visual effect is further accented with the Stainless Steel base, 510, and button. The newly positioned horizontal rocker also allows for easier one handed handling, with the natural curve allowing access to adjustment. The main chassis is milled out of 6061 Aluminum, then anodized a deep rich black with light texturing, providing a light, strong, and comfortable hold. The coin slotted battery caps and base have been dramatically upgraded in durability and quality, now manufactured out of 304 Stainless Steel, virtually eliminating durability and cross threading issues while also greatly increasing impact resistance. The 304 Stainless Steel 510 continues the durability upgrade, while the brass spring-loaded contact ensures consistent and conductive contact. The combination of 6061 Aluminum and 304 Stainless Steel allows the "flaskmaN"™ to be light, yet durable at points of mechanical stress, implementing a best of both worlds design foundation.

The YiHi SX350J-VF features four modes of output that drastically alter vaping experience, with a Soft mode for a slow gradual climb, a versatile Standard mode, and the near instant power of Powerful and Powerful+ settings. Alongside a full suite of memory modes, the SX350J-VF is capable of extremely versatile outputs that correspond with user preference and variances in atomizers that can be directly changed with the device itself. With a power output capable of up to 100W, the "flaskmaN"™ is capable of firing atomizers down to 0.15 ohm in this mode, giving it the range to handle practically every rebuildable dripping atomizer, rebuildable tank atomizer, and Sub-Ohm Tanks in the market. In Temperature Control mode, the SX350J is capable of firing atomizers down to 0.05 ohms, with the capability of 10 to 60 Joules of output. A smart sensor prevents dry burning, and when set correctly, drastically minimizes the risk of dry burning the wicking material of the atomizer. A bypass mode is also available, enabling users to utilize the device in mechanical output. A rich and bright adjustable rotary display screen features a full display that neatly organizes output wattage, output voltage, atomizer resistance, battery readouts, current mode, joule outputs, and current memory setting legibly and clearly. A gravity sensor system allows for the screen to follow intuitive handling, adjusting screen orientation with the orientation of the device while also allowing for gravity based adjustments. Continuing the storied and revolutionary design, the Project Sub-Ohm® "flaskmaN"™ SX350J 100W Box Mod by VaporFlask has successfully improved upon nearly every aspect of the platform with the synergistic implementation of drastic chassis upgrades and the integration of one of the most sophisticated chip sets today to create a luxurious, functional, and premiere device.

Product Features:
  • Exclusive Project Sub-Ohm® Colorway
    • Iconic Red and Black Trim
    • "flaskmaN"™ Engraving
    • Project Sub-Ohm® Engraving
    • Extremely Limited Edition
  • Iconic Curved Form Factor
    • Patented Design
    • Ergonomic to Handle
  • 22mm 510 Bezel
    • Stainless Steel Thread Points
    • Brass Spring Loaded Contact
  • Top Orientated Rotary Display
    • Gravity Sensor (Can Be Turned Off)
    • Full Readouts
    • Output Wattage
    • Output Voltage
    • Atomizer Resistance
    • Battery Display and Readout
    • Mode Selection
    • Joule Ouputs
  • 6061 Aluminum Chassis
    • Anodized a Rich Black
    • Lightweight and Durable
  • 304 Stainless Steel Base and Battery Caps
    • Greatly Increases Durability
    • Striking Visual
  • Improved Micro USB Port

SX350J-VF Specifications:
  • Atomizer Resistance Ranges
    • 0.05 to 0.3 ohms (Temperature Control Mode)
    • 0.15 to 3.0 ohms (Power Mode)
  • Power Mode
    • 5 to 100W
  • Temperature Control Mode
    • Output Joules : 10J to 60J
    • 200 to 580 Degrees Fahrenheit/100 to 300 Degrees Celsius
    • Anti-Dry Burning Technology
  • Output Voltage
    • 1.0 to 9.5 Volts
  • Four Modes
    • Powerful+ - Fastest Ramp Speed
    • Powerful - Fast Ramp Speed
    • Standard - Standard Ramp Curves
    • Soft - Gradual Curve
  • Buck and Boost/Boost, DC-DC Converter
  • 450 mAh Micro-USB Charging Port
  • Rotary Display
  • Gravity Sensor System
  • Upgradeable Software
  • Reverse Polarity, Output Short, Low Resistance, Low Battery Voltage, and Overheating Protection

Product Recommendations:
  • FOR USE WITH 20 AMP IMR/INR BATTERIES OR HIGHER ONLY! BATTERIES ARE NOT INCLUDED
  • Both Batteries Must Be Inserted Positive Side Towards the 510!
  • In order to use temperature control output, coils must be built using non-resistant wire. YiHi recommends Ni200.
  • Do not use any batteries if the outside wrapper has come off!
  • Turn off the device before pulling your batteries out.

***Always turn off the device and take the battery out when not in use!

Advanced User Item. Use At Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

Project Sub-Ohm® is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.

Average Rating: 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
The Best January 9, 2016
Reviewer: Matt from IN United States  
I bought this mod a couple of months ago and have to say it is the highest quality box I've used. The adjustability is awesome. Much easier than I expected. The finish is incredible, no scratches dents or dings and I use it all day every day. Having two 18650's it lasts all day with power to spare. A bit pricey but if you can swing it, it's well worth it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Mod December 23, 2015
Reviewer: Christopher Bruno from Billerica , MA United States  
If you are looking for an everyday mod, you could not do much better than this.  As with all flasks, battery life is incredible; the Yihi SX350J (while cumbersome) is powerful and consistent; and, the mod itself is a beeeeyouuut.  Not sure if the finish is meant to be scratch resistant, but it def is. And Project Subohm adds just enough detail to put this flask over the top.
Now the cons: I do prefer the DNA chip for its pure simplicity.  But the Yihi is a close runner up, and I haven't tried temp mode yet, so that could bring it even closer.  When I first received the mod, the chip kept reading low resistance (with and w/o an atty on).  Had to pull the batteries in and out a few times to finally get it straightened out.  But since then, it's been rocking.
All and all 2 thumbs up - love it!
And - as always - Vapordna is the best!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Flask December 2, 2015
Reviewer: Alan from Vermont  
Everything you always wanted in a flask. Good looks, ergonomic, and power!

The firing button can be a bit finicky but not bad. And be sure to watch for the 510 pin to make sure it doesn't stick.

All in all a great purchase, great product!

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
Best Mod to date November 30, 2015
Reviewer: Jason Rogers from Lexington, NC United States  
First, I would like to say this model is both strong and well made.  The materials are top notch, the sx350j Chip is a beast and handles both my Aqua V2 and my Omertia with ease.  The memory modes are wonderful, the buttons are very crisp, and the display is fantastic.  My only advice is to check the tightness of the screws and the areas where the top and bottom plates were connected.  I started getting random ohm spikes and upon inspection found a couple of the top screws were loose.  Upon further inspection, i noticed the contact areas weren't exposed properly, so i sanded them and re-tightened the screws.  It is amazing what this did for the mod, as my ohms now hold steady and they match the readings on my fluke meter.  Thanks again VaporDNA for providing me another awesome mod!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
the best of the best November 28, 2015
Reviewer: marc h from Borex, GENEVA Switzerland  
The flask is beautiful and the SX350J chipset one of the best i never vaped on. If i had to keep just one device it would be this one !

Was this review helpful to you?

View All Customer Reviews