Project Sub-Ohm™ "pocket"™ 60W TC Mini by SMY
The Project Sub-Ohm™ "pocket"™ 60W TC Temperature Control Mini by SMY combines a fully upgraded dual mode variable wattage and temperature control module with a beautiful color LED screen in a pocket sized form factor. With a full focus on improving not only performance but ergonomics, the "pocket"™ features an upgraded chipset capable of 5 to 60W of output wattage as well as Fahrenheit and Celsius output modes, with minimum atomizer resistances at 0.1 ohm for all modes. Despite the reduced form factor, the "pocket"™ integrates the full color LED screen from the original "briefcase"™, with upgrades to brightness and screen readout of atomizer resistance, puff counter, battery life indicator, output wattage or temperature, time and date display, settings navigation, as well the signature of SMY speedometer based power level display. Compact yet fully featured, the Project Sub-Ohm™ "pocket"™ 60W TC Mini by SMY.
- Temperature Control Module
- 200 to 600 Degrees Fahrenheit
- 0.1 to 1.0 Ohm
- 5 to 60W
- Full Color LCD Screen
- Speedometer Styled Power Display
- Puff Counter
- Resistance Readout
- Date and Time
- Battery Life Indicator
- Adjustable Screen Timeout, Stealth Settings
- Uses Single 18650 IMR Battery (Sold Separately)
- Redesigned Clean Interior
- Tab and Dual Magnet Door
- Ribbon Ejection
- USB Charging Port
- Manufactured out of Zinc Alloy
- SS 510 Fittings with Spring Loaded Positive Pin
- Icononic Project Sub-Ohm™ Engraving Inset Into Carbon Fiber Back Plate
- Individually Serialized
- Short Circuit, Reverse Polarity, Temperature, and Low Voltage Protection
- Project Sub-Ohm™ "pocket"™ 60W TC Mini by SMY
- One Microfiber Cleaning Cloth
- One USB Charger
- User Manual
- Utilizes ONLY 20A or Higher IMR/INR Batteries
- 18650 Battery is NOT Included!
- In order to use temperature control output, coils must be built using non-resistant wire.
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.