Sigelei 150W TC Temperature Control Mod
The Sigelei 150W TC Temperature Control Mod is the evolution of Sigelei's highly regarded box mod line-up, integrating a 150W output coupled with temperature control capabilities, and an ergonomic dual magnetized door and form factor. The Sigelei 150W TC features a staggered chassis with a rounded edge designed for better hand ergonomics, with a sloped access to the 510 allowing for a wider range of firing positions. With a maximal output wattage of 150W and a minimum atomizer resistance of 0.1 ohms, the Sigelei 150W TC can easily power and fire today's most popular tanks and atomizers. As the emergence of temperature controlled mods and atomizers have increased, Sigelei brings its well trusted name to the mix by fully integrating a temperature control module capable of firing from 212 to 572 degrees Fahrenheit. Manufactured out of high grade aluminum, the Sigelei 150W TC features a dual magnetized door that, in conjunction with a ribbon ejection system, makes battery swapping hassle free. A Quadrant Split Screen organizes vital information such as Battery Life, Output Wattage and Temperature, Output Voltage, and Atomizer Resistance. Bringing Sigelei's well renown manufacture and design into the forefront, the Sigelei 150W TC Temperature Control Mod is one of the premier high wattage, dual mode devices in today's market.
Product Features and Specs:
- High Grade Aluminum
- Staggered Chassis Design
- 10 to 150W Output Wattage
- 100 to 300 Degrees Centigrade
- 212 to 572 Degrees Fahrenheit
- 0.1 to 3.0 Ohm Atomizer Resistance Range
- Quadrant Display Screen
- Real-Time Battery Readout
- Atomizer Resistance
- Output Wattage/Temperature
- Output Voltage
- Utilizes Two High Amperage 18650 Batteries In Series (Sold Separately)
- Dual Magnetized Sliding Door
- Low Voltage Protection
- Low Resistance Protection
- Input High Voltage Protection
- Output Short-Circuit Protection
- Reverse Polarity Protection
- Overheating Protection
Advanced User Item. Use at Your Own Risk! Do Not Fire Atomizer Resistance Lower Than 1 Ohm!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.