Sigelei 75W TC Temperature Control Mod
The Sigelei 75W TC Temperature Control Mod is a compact, fully featured dual output mode device with temperature control and an atomizer minimum resistance of 0.05 ohms, providing enough power for nearly every Sub-Ohm Tank and rebuildable atomizer in the market. Utilizing a single 18650 Battery (Sold Separately), the Sigelei 75W TC has a power range of 5 to 75W, with increments of 0.1W. The temperature control feature also allows for a range of 212 to 662 degrees Fahrenheit and 100 to 350 degrees Centigrade, making it more than capable of handling appropriately built Ni200 Nickel atomizers. Manufactured out of high grade Aluminum Alloy, the Sigelei 75W TC features dual cutaway cover plates, allowing for incredibly easy battery access along with the potential for customization. Fully featured in a compact size, the Sigelei 75W TC asserts itself as a marquee compact box mod.
- High Grade Aluminum Alloy
- Dual Removable Plates for Battery Access
- 5 to 75W Output Wattage
- 100 to 350 Degrees Centigrade
- 212 to 662 Degrees Fahrenheit
- 0.05 Minimum Atomizer Resistance Range
- Quadrant Display Screen
- Real-Time Battery Readout
- Atomizer Resistance
- Output Wattage/Temperature
- Output Voltage
- Utilizes One 18650 Battery (Sold Separately)
- Low Voltage Protection
- Low Resistance Protection
- Input High Voltage Protection
- Output Short-Circuit Protection
- Reverse Polarity Protection
- Overheating Protection
Advanced User Item. Use at Your Own Risk! Do Not Fire Atomizer Resistance Lower Than 1 Ohm!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.