Sigelei Fuchai 213W TC Box Mod
The Sigelei Fuchai 213W TC Box Mod builds directly upon the original 213, integrating Sigelei's flagship chip that is capable of outputting up to 213W paired with one of the most comprehensive temperature control suites in a new, budget friendly chassis that maintains the performance while at a lower price point. Utilizing Sigelei's most sophisticated chipset in it's form factor, the Fuchai 213W TC features support for Kanthal, Titanium, Ni200 Nickel, and Stainless Steel heating elements along with wattage output up to the namesake 213W. This is powered via bottom loaded dual 18650 batteries with a sliding and locking mechanism that clicks securely into place and makes battery replacement quick and easy. Showcasing the 213W TC is the inclusion of both TCR (TCR Mode now calculated in Celsius) and TFR functionality with a 5 Coil Memory bank, greatly extending precision and customization. The inclusion of power preheat, in which a user set wattage and time dials output to ramp or decrease appropriately, and a temperature compensation mode that can compensate for fluctuations in temperature, combine to create one of the most sophisticated output capabilities available today on market. The OLED screen features a three column, four row display matrix that provides an amount of essential data at a glance, from detailed battery state and battery life meters to output voltage, resistance, and wattage. Two adjustment buttons are positioned on top of the OLED screen making it ergonomically feasible to use and adjust the Fuchai 213W with a single hand. The chassis design remains the same as the original 213, while moving into a lighter aluminum alloy material that offers a good balance of weight and durability. The Sigelei 213W features a Stainless Steel 510 with a Gold Plated Spring Loaded 510 to ensure consistent connection as well as durability. Maintaining the stellar performance of the 213 while dramatically reducing cost, the Sigelei Fuchai 213W TC Box Mod is a highly affordable yet supremely well balanced performance device.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 213W Maximum Output Wattage
- 10 to 213W
- 1.0 to 7.5V
- 0.1 to 3.0 ohm Atomizer Resistance Range
- 35A Maximum Output
- Preheat Power
- Set Output Wattage and Time
- Hugely Increases Vaping Capability and Precision
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- TCR Functionality
- Temperature Coefficient of Resistivity
- TFR Functionality
- Temperature Factor of Resistivity
- Resistance Read and Lock
- 5 Coil Memory Bank
- 200 to 570 Degrees Fahrenheit
- Sliding and Locking Bottom Battery Access Door
- Accepts Two 18650 Batteries (sold separately)
- Ergonomically Placed Controls
- One Hand Operation
- Adjustment Buttons Clustered Next to Firing Button
- OLED Display
- Four Row, Three Column Display
- Atomizer Resistance
- Output Voltage
- Output Current
- Battery State and Battery Life Indicator
- Output Wattage
- Output Temperature
- Micro USB Charge and Update Port
- Trim and Striking Design
- Sharp Angular Control Face
- Curved Chassis
- Aluminum Alloy Chassis
- Stainless Steel 510 Connection
- Spring Loaded Gold Plated Connection
- High Input Voltage/Reverse Battery/Low Resistance/Battery Imbalance/Low Input Voltage/Short Circuit/Overheating Protection
- One Sigelei Fuchai 213W Box Mod
- One Silicone Sleeve
- One Micro USB Charging and Update Cable
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.