Sigelei J80 80W TC 2000 mAh Box Mod
The Sigelei J80 Box Mod is one of Sigelei's most compact full featured offerings available that packs in a beautiful quadrant based OLED display, a 2000 mAh Lithium Polymer Battery, and up to 80W of output in a trim frame. Measuring only 67.5mm by 39mm by 24.5mm, the J80's chassis is manufactured out of high quality zinc alloy and features sharp angular lining with a clean two color scheme to create a striking visual aesthetic. Power output ranges from 10 to 80W and supports atomizers down to 0.05 ohms, with a 25A maximum output rating. Temperature control is also integrated on board, with support for Ni200 Nickel, Titanium, and Stainless Steel 316 heating elements. The chipset is powered by a 2000 mAh integrated lithium polymer battery that provides good range while allowing for the incredibly small form factor, and is also charged rapidly via a 2A charge capable port for minimal downtime. The quadrant based OLED display organizes essential data in a bright, easy to read arrangement, while a physical on and off switch make handling, transportation, and carrying safer and more convenient. Packing in a feature packed 80W based chipset in a durable, quality made zinc alloy chassis paired with a 2000 mAh LiPo battery, Sigelei's J80 Box Mod is a versatile platform in a petite package.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 80W Maximum Output Wattage
- 10 to 80W
- 0.5 to 7.5V
- 0.05 to 2.5 ohm Atomizer Resistance Range
- 25A Maximum Output
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel 316 Support
- Resistance Read and Lock
- 212 to 572 Degrees Fahrenheit
- 2000 mAh Integrated Battery
- OLED Quadrant Display
- Three Row, Three Column Display
- Atomizer Resistance
- Output Voltage
- Output Current
- Battery State and Battery Life Indicator
- Output Wattage
- Output Temperature
- Micro USB Charge and Update Port
- Physical On and Off Switch
- Trim and Striking Design
- Sharp Angular Control Face
- Curved Chassis
- Zinc Alloy Chassis
- Stainless Steel 510 Connection
- Spring Loaded Gold Plated Connection
- Overheating Prevention/Low Resistance Protection/Low Input Voltage Warning/Output Short Circuit/High Input Protection
- One Sigelei J80 80W TC Box Mod
- One Silicone Sleeve
- One Micro USB Charging and Update Cable
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.