Sweet Spot Vapors Ti Titanium Wire - 10 Feet
Made in the USA
Sweet Spot Vapors Ti Titanium Wire is a revolutionary product geared towards temperature regulation for temperature controlled output devices, while simultaneously working with mechanical and standard wattage output devices. Developed with over a year of research and development, Sweet Spot Vapors Titanium Wire is not your standard Ti resistance wire, built from the ground up for the vape industry. Manufactured from a custom metallurgical process, this particular titanium wire undergoes a proprietary vacuum annealing process, removing unwanted impurities and allowing for the most consistent heating possible. This wire will also not form any harmful oxides, allowing for the flavor of each build to be as pure as possible. By design, once standard Ti Wire reaches it's max temperature, it will "fail" by design, maximizing battery safety. Alternatively, Sweet Spot Vapors Ti X Wire does not appreciably climb in resistance, mimicking the performance of Kanthal and Nichrome, while still not containing Nickel and Chromium, alongside minimal Iron content. Ti X is built primarily for traditionally styled coil configurations as well as cloud chasing configurations.
- 0.4mm Ti Wire
- Regulates Temperature Faster Than 0.5mm
- Ideal for VV/VW and Tanks
- Slightly Cooler Vape
- 0.5mm Ti Wire
- Slower Ramp
- Builds Slightly More Heat
- Ideal for RDAs and Large Airflow
- 0.6mm Ti X Wire
- Does Not Appreciably Climb in Resistance
- Mimicks Kanthal and Nichrome While Maintaining Safety and Purity
- Ideal for Cloud Chasers and Traditionalists
- Approximately 1.8 Ohms Per Foot
- All Packs Include Real Muji Japanese Cotton
- WARNING: Do NOT Dry Burn Ti Wire, Sweet Spot Vapors Recommends Spaced Coils
- Resistance Will Climb According to Power Put Into Wire
- Start with One to Two Extra Wraps Per Coil
- Compared to 24 AWG Kanthal
- Approach Builds Differently Since Resistance is Dynamic
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.