Syntheticloud Spectra 200W Universal TC Box Mod
Syntheticloud's Spectra is the first box mod from the acclaimed brand that brought the Aeolus RDA series to the market, utilizing an extraordinarily capable chipset with a range of up to 200W and the sophisticated Universal Temperature Control suite, greatly expanding output versatility and capability. Integrating the new SBT-200UTC chipset, the Spectra features one of the most compatible and versatile output ranges on the market, named appropriately due to its ability to cover the spectrum of heating elements available today. In standard wattage output mode, capability ranges from 5 to 200W of output with a minimum atomizer resistance of 0.2 ohms. The hallmark feature of the Spectra is the aptly named Universal Temperature Control capability that features support for Kanthal A1, Ni200 Nickel, Titanium, as well as an adaptable mode for specialty wires and heating elements. In the UTC mode, users can also simultaneously set wattage settings for a more fine tuned output, supporting resistances all the way down to 0.04 ohms. The chassis of the Spectra builds upon the classic box mod design, featuring a magnetized battery access panel powered by two high amperage 18650 batteries (sold separately), gold plated electrodes, a three button control face, and a 0.91 inch display screen.. True to its name, the Syntheticloud Spectra 200W Universal TC Box Mod is an extremely versatile box mod with one of the most sophisticated temperature control suites available today.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 5 to 200W Range
- 0.2 ohm Minimum Atomizer Resistance
- 0.5V to 7.0V Output
- SBT-200UTC Chip Set
- Upgradeable Firmware
- Upgrade with Microchip PICkit 3
- Universal Temperature Control
- Kanthal A1
- Ni200 Nickel Support
- Titanium Support
- NA Support
- Support for Performance Wires
- Wattage Control Mode in TC
- Temperature Control Calibration
- 0.04 ohm Minimum Atomizer Resistance
- 200 to 600 degrees Fahrenheit
- Magnetized Battery Access Panel
- Gold Plated Spring Loaded Contacts
- Two High Amperage 18650 Batteries in Series (sold separately)
- Stainless Steel 510 Threading
- Gold Plated Spring Loaded 510
- Micro USB Port
- 0.91 Display Screen
- Two Line Display
- Atomizer Resistance
- Output Wattage
- Output Temperature
- Output Voltage
- Battery Life Indicator
- Background Screen
- Rubberized Classic Control Interface
- Low Voltage/Short Circuit/High Voltage/Low Resistance/Reverse Battery/Overheating/Overtime Protection
- One Spectra Box Mod
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.