Tesla Nano 100W TC Temperature Control Box Mod
The Tesla Nano 100W TC Box Mod is an ultra compact 4500mAh, 100W device that features dual Ni200 Nickel and Ti (Titanium) Temperature Output, simultaneously making it one of the smallest and highest performing box mods in today's market. Featuring a dual LiPo configuration in parallel, the Tesla Nano was carefully designed to dramatically reduce size while still providing tremendous range and top level power. The 4500mAh battery life allows for unprecedented battery life in comparison to size and feature set. Charging also supports up to 2A alongside passthrough technology through the charging port, allowing for expedient and convenient recharging. Featuring a full OLED screen, the Tesla Nano's adjustment buttons are placed on the top panel of the device, in an effort to limit accidental button presses during use due to the size. Temperature control output has been optimized for use with Ni200 and Titanium heating elements, allowing it to be effectively used as an all around device. With a minimum temperature controlled atomizer resistance of 0.05 ohms and a standard wattage based resistance atomizer resistance of 0.1 ohms, the Tesla Nano can not only be used as an effective compact carry device, but also a premier everyday device. Manufactured out of high quality alloys, the Tesla Nano 100W TC is the evolution of box mods to fully integrate a high performance chipset, long battery life, and an unbelievable form factor.
- One of the smallest, fully featured box mods today
- 7 to 100W Standard Output
- 0.1 to 0.14 Ohm Resistance - 7 to 60W
- 0.15 to 3.5 Ohm Resistance - 7 to 100W
- 200 to 600 Degrees Fahrenheit Ni200 Nickel and Ti Titanium Temperature Output
- 0.05 Ohm Minimum Resistance
- Bypass Mode
- 4500mAh Dual LiPo
- Charging Port
- Full OLED Screen
- Over Discharge, Low Voltage, Short Circuit and Low Battery Protection
- Top Positioned Adjustment Buttons
- Baked Finish for Durability
- Silver Plated Brass 510
- High Surface Area Firing Button
- High Quality Zinc Alloy Construction
- Temperature Control Compatible ONLY with Nickel and Titanium specific coils and atomizers
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.