Home > Devices > Variable Voltage / Variable Wattage Vaporizers >

  Teslacigs Invader III 240W Box Mod
Teslacigs Invader III 240W Box Mod

Alternative Views:

List Price: $59.99
Our Price: $44.99
Savings: $15.00

Stock Status: In Stock

Product Code: TCINV3

Choose Your Device Finish
Click to view another Choose Your Device Finish


Teslacigs Invader III 240W Box Mod

Teslacigs Invader III is a precision made, quality device that features a throwback design coupled with tremendous maximum output power, integrating a potentiometer adjustment knob with a simplistic LED feedback bar with a maximum output of 240W. The Invader III is machined out of Zinc Alloy, and following in the mold of Teslacigs other devices, features extremely high quality finishing and coatings. The device features a comfortable and timeless design, and measures 90.5mm by 50.5mm by 23mm. Simple in aesthetics, the Invader III features a display-less design in which users adjust the output voltage from the notched potentiometer adjustment with feedback from the device regarding integrated safety features provided by the blue LED bar positioned directly above the oversized firing button. This design creates a durable, simple, and battery efficient platform. Powered by two high amperage 18650 batteries (sold separately), the Invader III's battery bay and 510 connection is milled out of brass and plated with silver to provide superior conductivity. With a classic and durable chassis and a capable chipset, the Teslacigs Invader III 240W Box Mod is an affordable and well balanced platform.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

Product Features:
  • 240W Maximum Output
    • 0.1 ohm Minimum Atomizer Resistance
    • 3.7V to 6.6V Max Output
    • 45A Max Output Current
  • Potentiometer Adjustment
    • I to V Adjustment
      • 3.7V to 6.6V
      • 20 Marked Increments
    • Turn to Adjust
    • Classic Feel
    • Low Battery Consumption
  • Zinc Alloy Construction
    • Stainless
      • Advanced Drawbench Construction
      • Vacuum UV Process for Scratch Resistance
    • Blue and Black
      • Premium Baked Finish
      • Glossy Shine
  • LED Feedback Bar
    • On/Off Feedback
    • Low Voltage/Over Draw/Short Circuit/Over Heat/Over Current Feedback
  • Dual Magnetized Battery Bay Door
    • Spring Loaded Silver Plated Brass Connections
    • Dual High Amperage 18650 Powered
    • Batteries Sold Separately
  • Durable 510 Thread Point
    • Spring Loaded Silver Plated Brass Connection
  • Oversized Firing Button

Product Dimensions:
  • 90.5mm by 50.5mm by 23mm

Product Includes:
  • One Invader III 240W Box Mod
  • User Manual

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use at Your Own Risk!

NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Average Rating: 5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
Smaller than it looks September 29, 2016
Reviewer: Moses Avila from Fresno, CA United States  
When I ordered this box I thought it was going to be as big as my IPV3, but it was much smaller, and I love that. I love the magnetic door, and the voltage knob, I don't care about USB charging. The issues I have with it are both spring loaded pins for the batteries are at the top, making it a little hard to insert the positive to spring, I always feel like it's going to dent the battery, but it never does. I have to press the button firmly otherwise it wont connect and the light will go off.  And it'll last a full 24 hours, then I have to make sure I have spare batteries on me.
I still love this box. The set it and forget it of the voltage. Even the no screen.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great mod August 22, 2016
Reviewer: Christopher d from San Jose, CA United States  
No issues , easy set up and use. Looks great.

Cons ; some batteries have a hard time getting in but eventually fit

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Perfect! August 20, 2016
Reviewer: Nick from Colombia  
I've been looking for a box mod like this since I started doing my own builds. Simple, no bells and whistles, no TC, no screen, but regulated and safe at the same time. Finally, I found it! Great mod, does what it is meant to do, huge power, no rattles anywhere. Small and relatively light too.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Best ever August 11, 2016
Reviewer: Todd Mueller from El cerrito, CA United States  
The perfect mix of mechanical like features and regulated safeties. And it hits like crazy. The batteries can be a bit of a pain in the but to put in, needs just a little more room. Makes me think im going to break the contact each time. Otherwise excellent, and tge blue led is effing rad.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Tesla Invader III July 27, 2016
Reviewer: Connor Hrdlicka from Suwanee, GA United States  
I really dig this device. Its got tons of power and is so simple. I use a limitless rdta with this and it chucks the vapor.

Was this review helpful to you?

View All Customer Reviews