Home > Sale > Clearance Hardwares >

Uwell Rafale VRBA Coil Kit

Uwell Rafale VRBA Coil Kit


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.


List Price: $13.99
Our Price: $9.99
Sale Price: $4.99
Savings: $9.00

Stock Status: In Stock

Product Code: RAFVRB

Save on Replacement Coils

  
Save on Flavor of the Week

  
Save on Tanks

  
Save on Batteries

  
Save on Chargers

  
Save on Wicks

  
Save on Wires

  
Save when purchased together

Coil Master Spinner 1 - SS [Add $8.99]

Avatar VapeNut Vapor Eliminator [Add $109.99]

Chubby Gorilla E-Liquid Bottle (30ml) [Add $1.49]

Coil Master 521 Tab Mini Ohm Meter [Add $18.99]

GeekVape Essential Tool Kit [Add $7.99]

Coil Master Ceramic Tweezer [Add $8.99]

Qty:  
Description
 
Uwell Rafale VRBA Coil Kit

The Uwell Rafale VRBA Coil Kit allows users to build and configure custom coil structures for the Rafale Parallel Sub-Ohm Tank and include a specially made Uwell Rafale Coiler that assists in making compatible coils. The VRBA base is attached via allen screw and features a silver plated contact for superior conductivity with PEEK insulation.

Please Note: The Uwell Rafale VRBA Coil Kit is intended strictly for highly experienced and proficient users and requires careful assembly and metering before use. It is NOT recommended to use this kit with any non-regulated output device.

Product Features:
  • Uwell VRBA Base
    • Allen Key Secured
    • Jump Ring
    • Silver Plated Contact
    • PEEK Insulator
  • Uwell Rafale Coiler
    • Builds Coils Specifically for the VRBA Base

Product Includes:
  • Uwell VRBA Base
  • Uwell Rafale Coiler
  • Jump Ring
  • Prebuilt Reference Coil
  • Allen Key
  • Additonal O-Rings and Screws
  • Organic Cotton Strip

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling


Advanced User Item. Use at Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the use and/or handling of Li-Ion (Lithium-Ion), LiPo (Lithium Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-Ion), LiPo (Lithium Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved

Average Rating: 4.5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
Good concept, but for high wattage only August 26, 2017
Reviewer: Ferenc Lombai from Leányfalu, Other (Non US) Hungary  
I had no issue building the coils, but on an eleaf pico and in the Crown II mini tank I had no good experience with these. The coil inner diameter is 5.5-5.7 mm and the build length is 8mm. This means very high heat capacity for any coils but lowering the wire diameter will increase the resistance dramatically. I'd like to use it for temp. control, but it needs high very wattage (80-100W) to get the desired temp within 0.1-0.2 sec. This high wattage heat the whole crown II mini to unpleasant levels.
My best compromise is now an SS 316L 28AWG wire with 5-6 full wraps. This can heat up with 60W max power to 220 Celsius in 0.5-0.8 sec. But the RBA II is much better suited for this tank. Beside this item is not suited for my needs, the build quality, the packageing and the easyness of building should make it a reasonable choice for Raffle or crown II tanks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Bought to use in Crown II September 4, 2016
Reviewer: Anonymous Person from greenville, NC United States  
Steeper learning curve, but...
It's not the easiest to build on at first, though I imagine the more you do, the easier it will get. But I have to say that the flavor and vapor are well worth it...

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent enthusiast product June 8, 2016
Reviewer: Matthew Whittle from Altona North, Victoria Australia  
Fantastic next step for the Rafale tank. I have these wound with 316SS Clapton wire coils, they are the best TC experience I have had.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Very nice February 27, 2016
Reviewer: Josh Anderson from bellaire, OH United States  
At first I had a little difgiculty building coils but it took no time to get the hang of it. I cant tell the difference in coils. Great buy great price!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great RBA! February 8, 2016
Reviewer: Nicholas Morgan from Franklin, NC United States  
This is a really good RBA!  After a couple of practice runs at building it, it is quite easy to build.  The vertical coil is my favorite vape by far!

Was this review helpful to you?

View All Customer Reviews