Vapecige Bigger Triple 18650 DNA 200 200W Box Mod
The Vapecig Bigger DNA 200 utilizes a big body, T6 aluminum chassis that pairs an easy access triple 18650 battery design with the Evolv DNA 200, making it one of the few 18650 powered DNA 200 devices in the market. The Bigger is built on the fundamental concept of providing a big body, heavy duty chassis designed to make a bold statement, in line with the DNA 200 output and triple battery power source. Manufactured out of T6 Aluminum, the Bigger measures 83mm by 97mm by 26mm, making it fit for heavy duty use and utilization. Durability and functionality is at the Bigger's core design philosophy, with the triple 18650 battery bay allowing for it to be one of the very few DNA 200s to utilize a non Lithium Polymer power source. The battery sled features an edge to edge design alongside gold plated contacts with spring-loaded negatives allowing for easy battery fitting. The battery door features large rare earth magnets on each corner of both the chassis and the door, providing a secure attachment point. The 0.91 inch OLED screen, adjustment buttons, and Micro USB port are positioned on the front face of the device, with a traditionally positioned firing button. The Evolv DNA 200 provides tremendous output range and compatibility, featuring a tremendous peak efficiency of 97%, 1 to 200W of output capability, a fully customizable user interface, and sophisticated adjustments. The Vapecig Bigger DNA 200 provides one of the most heavy duty, industrial, and big body frames coupled with the top level performance of the Evolv DNA 200 at an incredible price point.
Please Note: Please Set Escribe Battery Settings to Match Battery Input
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- Big Body Chassis
- 83mm by 97mm by 26mm
- Hard Aluminum T6 Construction
- Industrial Feel
- Triple 18650 Battery Powered
- Quadruple Magnet Battery Door Access
- Full Sled
- Gold Plated Contacts
- Ejection Ribbon
- Allows for Easy Exchange and Replacement
- Batteries Sold Separately
- Please Note: Batteries must be matched in brand and model at all times. Discharge and recharge batteries within the same grouping of three.
- 0.91 inch OLED Screen
- Copper Spring Loaded Contact
- 510 Stainless Steel Threadpoints
DNA 200 Features:
- 1 to 200W Output Range
- 100W Kanthal Range (Able to be changed through Escribe)
- 200W Max Temperature Range
- 1 to 9V Output
- 0.1 to 2.0 ohm Kanthal Resistance Range
- 0.08 to 1.0 ohm Temperature Sensing Range
- Temperature Range
- 200 to 600 Degrees Fahrenheit
- Cell by Cell Monitoring
- Cell Balancer
- Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection
- Autosensing Temperature Resistance
- Lock Mode
- Stealth Mode
- Power Lock Mode
- Power Preset Mode
- Resistance Lock
- Max Temperature Adjustment
- Output Current Continuous Max
- Output Current Instantaneous Peak
- Input Voltage
- Input Current
- Screen On Current
- Quiescent Current
- Power Down Current
- In order to use temperature control output, coils must be built using non-resistant wire. Evolv recommends Ni200.
- Please refer to Escribe documentation for walkthroughs and information on how to utilize Escribe.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
Rip Trippers - BIGGER DNA 200!!