Vapor Shark DNA 133 Box Mod
Vapor Shark's DNA 133 is the newest edition of their signature platform, integrating Evolv's DNA 133 chipset that features a maximum of 133W of output power alongside seven preloaded output settings pertaining to various heating elements and an improved Zip Charging system that charges both high amperage 18650 batteries (sold separately) in 90 minutes. The Vapor Shark 133 retains the signature Vapor Shark form factor and design, with a clean and trim box mod profile and a large bottom mounted OLED screen. The battery door features a dual magnet enclosure with a ribbon ejection system for convenience. Vapor Shark's 3 Step Paint Process of anodizing the CNC aluminum construction black, painting, then rubberizing the chassis creates a comfortable and visually pleasing aesthetic. Inside, the DNA 133 provides extraordinary power, efficiency and customization, with over 93 configurable options that can be adjusted through the companion Escribe software. The Vapor Shark 133 also comes preloaded with seven user profiles, optimized for specific heating elements such as Kanthal, Ni200 Nickel, SS316L, Titanium, and Sweet Spot Titanium. The sophistication of Evolv's chip set extends so far as to analyze the internal resistance and thermal characteristics of the chassis itself to ensure optimal output. Timeless in design while integrating the most sophisticated of output technology, Vapor Shark's DNA 133 Box Mod is a flagship platform designed to be one of the most well rounded output devices available today.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- Signature 3 Step Paint Process
- Anodized Black
- Oxidized Paint
- Rubberized Finish
- Evolv DNA 133
- Downthrottled DNA 200 Platform
- Ultra Tactile Firing Button
- Stealth Adjustment Buttons
- Positioned Above USB Port
- Micro USB Charger
- Zip Charging Technology
- 90 Minute Charge
- 7 Preloaded User Profiles
- Ni200 Nickel
- Sweet Spot Titanium
- Bottom Mounted OLED Screen
- Gold Plated Spring Loaded 510 Connection
- CNC Aluminum Construction
- Magnetized Battery Access Door
- Dual High Amperage 18650 Powered
- Batteries Sold Separately
DNA 133 Features:
- 1 to 133W Output Range
- 100W Kanthal Range (Able to be changed through Escribe)
- 133W Max Temperature Range
- 1 to 6V Output
- 0.1 to 2.0 ohm Kanthal Resistance Range
- 0.08 to 1.0 ohm Temperature Sensing Range
- Temperature Range
- 200 to 600 Degrees Fahrenheit
- Cell by Cell Monitoring
- Cell Balancer
- Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection
- Autosensing Temperature Resistance
- Lock Mode
- Stealth Mode
- Power Lock Mode
- Power Preset Mode
- Resistance Lock
- Max Temperature Adjustment
- Input Voltage
- Input Current
- Screen On Current
- Quiescent Current
- Power Down Current
- 89.05mm by 54.40mm by 23.40mm
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling. Advanced User Item. Use at Your Own Risk!
- In order to use temperature control output, coils must be built using non-resistant wire. Evolv recommends Ni200.
- Please refer to Escribe documentation for walkthroughs and information on how to utilize Escribe.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.