Home > Rebuildables >

  Vulcan RDA Rebuildable Atomizer From Japan
Vulcan RDA Rebuildable Atomizer


 
Alternative Views:


Our Price: $59.99

Stock Status: (Out of Stock)

Product Code: VN0001

Save on Flavor of the Week

  
Save on Matching Drip Tip

  
Save on Cloud Chasing Sleeve

  
Save on Batteries

  
Save on Chargers

  
Save on Wicks

  
Save on Wires

  
Save when buy together

Pen Style Refillable Plastic E-Juice Bottle (20 ml) [Add $1.99]

CW-20 Kuro Koiler Wire Coiling Tool [Add $18.99]

Ultra Compact Ohm Meter by Efest (Ohm Meter + Voltage Meter) [Add $18.99]

Ceramic Tipped Tweezers [Add $13.99]

VVS Mod Polishing Kit [Add $19.99]

VapeBand (VaporDNA Edition) [Add $1.50]

Qty:  
Description
 
Our very first RDA from JAPAN! Craftsmanship Meets Affordability! That is the power of the VULCAN RDA! This RDA will create a whole new category in the market of high end RDAs.

Made In Japan

The Vulcan RDA is a three-piece design dripping atomizer that was built from a foundation of functionality and quality: A top and bottom heat fins that make sense! With the bottom base/fin carved out of a single solid piece of stainless steel, heat-dissipation has gone to a whole new level! No more over-heating MODs due to long draws. A unique air-vent and AFC design that brings the vents closer to the coils. Super-deep juice well that under passes the two side posts allowing maximum space utilization. The result is a product of quality you should expect and desire from a Japanese CNC perfectionist Producer.

The Vulcan Atomizer is made with the followings:
  • Full stainless steel
  • Single solid piece construction
  • Revolutionary "under-passing" juice well
  • A truly functional bottom base heat sink
  • Innovative AFC side walls
  • Double Laser cut vent holes
  • Red copper bottom contract pin/screw
  • PEEK insulators
  • 3 sets post screws out of the box
  • Precise machining with unmatched price!
  • Truly a RDA that has both amazing performance and unbelievable price!
  • MADE IN JAPAN!
Advanced User Item. Use at Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Huge Thank to Rip Trippers For Reviewing Vulcan RDA Rebuildable Atomizer From Japan
Huge Thank to Zvapers For Reviewing Vulcan RDA Rebuildable Atomizer From Japan


Average Rating: 5 of 5 | Total Reviews: 34 Write a review »

  0 of 0 people found the following review helpful:
 
Awesome! March 19, 2015
Reviewer: Christian Yeganeh from Leesburg, VA United States  
It's a little warm and tight airflow, but very nice. The juicewell is deep and nice. My only complaint is I've had to get a little creative with my favorite build as it involved wrapping the cotton around the outside of the posts. It doesn't have a lot if space between them and the edge. Which if you don't have a build that does that, youll be fine. It's got great flavor and ok vapor production. If you like the flavor, try this RDA.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Vulcan March 19, 2015
Reviewer: Julio Pollarolo from Pearland, TX United States  
I did not tried yet, I think is a good design, and is well constructed.
Solid and with a good size. But I can not tell about how it works yet

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Japanese build quality matters. March 3, 2015
Reviewer: Dean B. from San Jose, CA United States  
I wrote a whole big review only to have the system say cut it down, so here is my basic review.

Build quality on this unit is top notch. No defects at all. Made in Japan means something.

It is insanely easy to get good coil builds on, it'll take 24 gauge no problem.

It holds very much juice because of deep juice wells.

With the cloud sleeve it billows like the best of them. With the stock sleeve it absolutely kills it on flavor.

Worth every cent.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
The Ninja RDA February 11, 2015
Reviewer: Anonymous Person  
With the cloud chasing sleeve, this thing is like snorkeling in a sea of cool, vibrant ejuice. Clouds, flavor and it looks like a component from a NASA satellite. Love it!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 months later... January 28, 2015
Reviewer: Alexander King from Portland, OR United States  
And I still love it! I drilled out my airflow, but I'd recommend ordering the cloud chasing sleeve unless you enjoy a tighter draw/ wanna DIY the AFC like I did.

Was this review helpful to you?

View All Customer Reviews