The Project Sub-Ohm™ CloudSonic™ RDA is built from the platform of the Centerfold RDA, incorporating a strategically positioned auxiliary vertical airflow paired with a dual slotted side airflow to create incredible flavor and vapor production from the resulting turbulent swirl effect. Coupled with top notch quality materials, the The Project Sub-Ohm™ CloudSonic™ RDA is an extremely versatile atomizer catering to nearly every aspect of vaping.
Designed by Project Sub-Ohm™
Made in the USA
With the design philosophy grounded in the pursuit of perfecting the vape experience, Project Sub-Ohm™ has redesigned and reinnovated the platform of the Centerfold RDA, improving upon it in every aspect. From this platform, the main focal point of this rebuildable dripper was to effectively incorporate and integrate the auxiliary center airflow, and from that focal point, the CloudSonic™ came into fruition. The center airflow is incorporated on a raised platform located centrally, for the dual effect of delivering airflow in the most vertical fashion possible while eliminating possible leakage out of the intake. Fully adjustable, seating the airflow is done using a triple adjustable airhole configuration, allowing users to use their preferred coil configuration in conjunction with the vertical and side airflow as efficiently as possible. The side airflow is features a staggered dual horizontal slot pattern, allowing for airflow entry at different points and heights, enhancing the interplay of air within the chamber. This design also allows for effective adjustment from the top cap, allowing the user to close portions of the top or bottom slots, fine tuning the experience.
Machined out 303 Stainless Steel, the CloudSonic™ features a quad post design, each posthole with a clearance of 2mm, easily accommodating demanding coil configurations. Extremely high grade PEEK insulation is used, allowing the CloudSonic™ to stand up to high amounts of heat while maintaining structural integrity. The base, sans center post, features full Rhodium Plating, creating a visually stunning effect. The Delrin Competition Drip Top measures at 10mm, slightly tapered for comfortability. A knurled 510 adapter ring allows for the use of standard 510 drip tip fittings. The reinnovation of innovation. The Project Sub-Ohm™ CloudSonic™ RDA.
- Fully Adjustable Auxiliary Center Airflow
- Staggered Dual Horizontal Side Slot Pattern
- Airflow Can Be Run Independently or in Conjunction
- 5mm Juice Well
- Split Positive Post with Deckmilled Negatives
- Delrin Competition Drip Top
- 303 Stainless Steel and High Grade PEEK Insulation
- Rhodium Plated Base and Deck
- Silver Plated Contact
- Engraved with the iconic Project Sub-Ohm™ Logo
- 22mm Diameter
- 10mm Delrin Competition Drip Top
- Black Knurled 510 Adapter Ring
- Side Airflow Measures 8mm by 1mm
- 2mm Side to Vertical Airflow
- 5mm Deep Juice Well
- 2mm Negative Post Holes
- 2mm Positive Post Holes (each)
- 303 Stainless Steel Construction
- High Grade PEEK Insulators
- Rhodium Plated Deck and Base
- Silver Plated Contact
- Engraved with the Iconic Project Sub-Ohm™ Logo
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.