Wismec Neutron Interchangeable Two Post RDA - Jay Bo Designs
Designed in California
The Wismec Neutron RDA by Jay Bo Designs is the newest flagship platform following in the foot steps of the vaunted Indestructible series, implementing an interchangeable two post system that allows for standard or series styled coil configurations within a spacious 25mm diameter and focused funneled top airflow. Measuring a stout 25mm in diameter, the Wismec Neutron is slotted to be the flagship rebuildable dripping atomizer available today within the Wismec line-up. The chassis design is grounded within the Wismec Indestructible series, maintaining the overall design language and aesthetic, while adding more aggressive lines to match the size increase. Inside, the build deck measures a spacious 21mm in internal diameter with a 5mm deep juice well providing ample wicking space. The Neutron features an interchangeable two post design that allows users to swap between two configurations, with the standard loadout implementing a two post, four terminal design intended for parallel coil mounting. By disassembling and installing the included series coil post, the Neutron is then able to run a build deck specifically for series coils which greatly expands functionality by allowing large surface area configurations while effectively maintaining resistance when properly configured. This essentially allows a user to run a serial dual coil configuration with the resistance equivalent to just one of those coils, pairing excellently with high power systems such as Wismec's RX2/3. The Neutron also integrates a revised Vortex Airflow System, with airflow entering through the top of the chamber through six 2.5mm diameter airholes which are then funneled down by special cutouts in the top cap. The conical shape of the top cap also contribute to a more effective passage of airflow within the build chamber, resulting in tremendous vapor and flavor production. Finally, the Neutron's 12mm bore drip cap can be independently removed without the need to readjust airflow, providing convenient dripping access. Following the heritage of cutting edge platforms intended to raise the bar in design and execution, Wismec's Neutron RDA is another crowning achievement in design.
- 25mm Diameter
- Interchangeable Post Build Deck
- Parallel Coils Post Configuration
- Four Terminal Arrangement
- 2mm Diameter
- Side Mounted Hex Screws
- Unique Design for Bottom Terminals
- Series Coils Post Configuration
- Stacked Positive and Ground Terminal
- Dual Terminal Neutral Post
- Allows for Series Coil Arrangements
- Increase in Heating Element Surface Area
- Maintain Resistance
- 21mm Inner Diameter Build Deck
- 5mm Deep Juice Well
- Vortex Airflow System
- Top Airflow System
- Six 2.5mm Diameter Airholes
- Throttled and Funneled by Top Cap Cutouts
- Directs Down into Chamber
- Conical Top Cap Design
- Knurled and Heat Sink Design
- 12mm Bore Drip Cap
- Removal for Easy Dripping
- High Quality Stainless Steel Construction
- Engraved Bottom
- One Wismec Neutron RDA
- Parallel Coil Post Preinstalled
- One Series Post Set
- Two Clapton Coils
- Spare Parts Pack
- User Manual
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.