Wismec Reuleaux RX300 Quad 18650 Box Mod - Jay Bo Designs
Designed in the USA
The Wismec Reuleaux RX300 is the next generation flagship device of the benchmark setting Reuleaux RX series, packing in an unprecedented quad 18650 battery powered chipset capable of an astounding 300W of true power in a expertly crafted chassis that remains comfortable and easy to handle. Heralding in the new generation of RX devices, the RX300 is the first Wismec platform to utilize a four high amperage 18650 battery (sold separately) configuration, providing unprecedented battery life and a whopping 300W of true maximum power. With an atomizer resistance range of 0.1 to 3.5 ohms and a 50A maximum output current rating, the RX300 is capable of easily handling practically any atomizer requirement needed. Full temperature control capability is also on board, with Ni200 Nickel, Titanium, Stainless Steel and TCR modes available with a range of 200 to 600 degrees Fahrenheit. In order to maintain a comfortable and practical size, the RX300 has revised the classic side loading battery design of the last generation RX platforms by now utilizing a bottom positioned locking battery bay door, allowing users to quickly load batteries into the RX300 while keeping the size well balanced. The RX300 integrates a next generation 0.96 inch OLED display, with a vibrant and vertically orientated display that now accurately displays each individual battery level. The chassis of the RX300 has also seen an upgrade in materials used, and is available with either a Leather Panel trim or a true Carbon Fiber trim. Entering the market as one of the most anticipated and most capable output devices ever released, Wismec's RX300 is primed to take 2017 as one of the premiere platforms available.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of four. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 1 to 300W Output
- 0.1 to 3.5 ohm Atomizer Resistance Range
- 50A Maximum Output Current
- Firmware Upgradeable
- Preheat Capability
- Custom Logo
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- Three Memory TCR
- Fine Tuned Temperature Controlled Output
- 200 to 600 degree Fahrenheit Range
- 0.05 to 1.5 ohm Atomizer Resistance Range
- Next Generation 0.96 inch OLED Screen
- Vertical Orientation
- Six Row, Two Column Display
- Output Mode
- Output Power
- Output Temperature
- Atomizer Resistance
- Output Amperage
- Individual Battery Life Indicators
- Provides Accurate Readouts for Each Battery
- Stealth Mode
- 180 Degree Rotation
- Quad High Amperage 18650 Powered
- Flip Open and Lock Design
- 24K Gold Plated Terminals
- Bottom Positioned Door
- Quad High Amperage 18650 Powered
- True 300W Output
- Incredible Range
- All Batteries Sold Separately
- Zinc Alloy Base Chassis
- Leather or Carbon Fiber Trims
- Real and Luxury Materials Used
- Three Button Control Face
- Advanced Cell Balancing Trickle Charge System
- Ensures Equal and Efficient Charging to All Cells
- 1.5A Avatar Quick Charge Compatible
- Reverse Charging Adapter Compatible
- Screws into 510
- Converts to Powerbank
- Sold Separately
- Stainless Steel 510 Threading
- 24K Gold Plated Spring Loaded Connection
- One Wismec RX300 Box Mod
- One Micro USB Cable
- User Manual and Warning Card
- In order to use temperature control output, coils must be built using non-resistant wire.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.