Pioneer4you reaches their pinnacle with the innovative, yet affordable iPV4 100 Watt Box Mod, now available in a black finish!
The iPV4 100 Watt Box Mod is the newest device in the Pioneer4you line up, and now comes in a full black edition! The platform is built around the YiHi SX330-V4S chip featuring temperature control with a soon to be released downloadable upgrade, allowing for fine control, safety, and durability. The chassis is manufactured out of aluminum billet, ergonomically form fitting to the user's hand for a comfortable, yet sturdy feel. Utilizing two 18650 batteries that gives this device amazing battery life with a very easy to use battery cover that conveniently slides on and off for on-the-go battery swaps. Updating the device is done with the micro USB cable. There is an integrated 3.5mm DC connector charging port with 9v charging voltage and 2A current. The 510 connector on the device is spring loaded for versatility for today's atomizers. Making a return is the wattage memory feature that allows you to store the wattage for your preferred rotation of atomizers on this device and of course a beautiful easy to read OLED display screen. A significantly upgraded device for the fraction of the price. The iPV4 100 Watt Box Mod by Pioneer4you.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Product Features and Specs:
- Heavy Duty Aluminum body
- YiHi SX330-V4S chip featuring temperature control with a soon to be released downloadable upgrade
- Utilizes two high amp 18650 batteries (removable sold separately)
- Three button design
- Micro USB port for updates
- DC connection (not included) rated at 9v charging voltage and 2A current.
- Easy to use battery cover
- 510 spring loaded connection
- Output wattage range of 7w-100w
- Atomizer Resistance: 0.10 ohm - 3.0 ohms
- 0.96" OLED Screen
- Output voltage: 1.0V - 7.0V
- Input current: 1.3A - 40A
- Input voltage: 3.2v - 4.5v
- Reverse polarity protection
- Battery low voltage protection
- Low resistance protection
- Temperature overheat protection
- Output short circuit protection
What's in the Box:
- One iPV4 Box Mod
- One user manual
- One USB cable for updates
***Do NOT use the 9 Volt Port under ANY circumstance. Please take care to minimize or eliminate the presence of liquid near the 9 Volt Port, located opposite the firing button, for safety purposes
Advanced User Item. Use at Your Own Risk! Do Not Fire Atomizer Resistance Lower Than 1 Ohm!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.