iPV4S 120W TC Temperature Control Mod by Pioneer4you
The iPV4S 120W Box Mod by Pioneer4you is the upgraded platform to the iPV4, integrating the new YiHi SX330-V4SL, now capable of 120W output, Ni200 Nickel and Ti Titanium based temperature modes. Keeping in line with maintaining the ergonomics of the iPV4 platform, the iPV4S now features a 20% boost to top end wattage power to 120W, easily powering today's most popular Sub-Ohm Tanks and RBAs. The iPV4S now fully supports dual mode Ni 200 Nickel and Ti Titanium built atomizers in Joule Mode, giving it the versatility of standard wattage coupled with advanced temperature control abilities. Constructed out of aluminum and rubberized materials, the iPV4S maintains the ergonomic fit and feel of it's predecessor, utilizing a magnetized removable door in a horizontal C frame shape. Affordability, power, and versatility, the hallmark of iPV. The iPV4S 120W Box Mod by Pioneer4you
Product Features and Specs:
- Heavy Duty Aluminum body
- YiHi SX330-V4SL Chipset
- 10 to 120W Output Wattage
- 5 to 50J (Ni200 Nickel)
- 5 to 100J (Ti Titanium)
- 100 to 300 Degrees Centigrade
- 212 to 572 Degrees Fahrenheit
- 1.0 to 7.0V Output Voltage
- 0.1 to 3.0 Ohm Minimum Kanthal Built Atomizer Resistance
- 0.12 to 1.0 Ohm Minimum Ni200 Nickel and Ti Titanium Built Atomizer Resistance
- Utilizes Two 18650 batteries (Sold Separately)
- Reverse Polarity Protection
- Battery Low Voltage Protection
- Low Resistance Protection
- Low Voltage Protection
- Temperature Overheat Protection
- Output Short Circuit Protection
What's in the Box:
- One iPV4S 120W Box Mod
- One Manual
***Do NOT use the 9 Volt Port under ANY circumstance. Please take care to minimize or eliminate the presence of liquid near the 9 Volt Port, located opposite the firing button, for safety purposes
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.