Home > Devices >

  iTaste MVP 3.0 Pro 60W Starter Kit by Innokin (The Essential Sub-Ohm Starter Kit)
iTaste MVP 3.0 Pro Starter Kit

Alternative Views:

List Price: $89.99
Our Price: $79.99
Savings: $10.00

Stock Status: (Out of Stock)

Product Code: INK003

Choose Your Device Finish


Innokin Has Released The iTaste MVP 3.0 Pro Starter Kit To Add To Their Legendary MVP Line Now With A Sizeable 4500 mAh Integrated Battery, 60 Watts of power, and an iSub G Sub-Ohm tank!

The iTaste MVP 3.0 Pro has been upgraded from top to bottom with impressive specifications making the iTaste MVP 3.0 Pro the perfect starter kit for new vapers, but also a worthy addition to the seasoned vaper's rotation. The variable voltage feature can be adjusted from 3.0v to 9.0v in increments of .1 volts, while the variable wattage feature can be adjusted from 6.0 to 60 watts, doubling the power of its predecessor, and with an ohm cutoff of .2 ohms can be run Innokin's included iSub G Sub-Ohm Tank with ease. Utilizing vRMS DC current, power deviation is held within .1 watts for an incredibly accurate and consistent vape every time. The rich OLED screen is now integrated to accompany the new chipset, providing full readouts for battery life, output and ohm reading. The battery life has been substantially increased to a 4500 mAh integrated battery to ensure all day vape potential, a significant upgrade from the MVP 3.0. The 510 how has a spring loaded, brass positive contact ensuring easy and constant contact with all standard atomizers, with an included Ego adapter for use with compatible tanks. The construction of the MVP 3.0 Pro has durability and a 22mm flush fitting bezel in mind all while encased in a sturdy aluminum case. An integrated Micro USB cable at the base gives the MVP 3.0 Pro ultimate usability as a portable power source, charging your favorite devices from massive battery bank without the need to carry any additional cables. Passthrough capability allows for simultaneous charging and vaping, with a speedy 1A charge current for low downtime. The iTaste MVP 3.0 Pro Starter Kit comes in five great finishes: Silver, Fuchsia, Black, Blue, and Gold!

The included iSub G Sub-Ohm tank combines high quality construction, an innovative No-Spill Coil Swap System, and fantastic performance. Innokin's new 0.5 ohm coil, manufactured using Japanese Organic Cotton, the iSub delivers pure, clean flavor and fantastic vapor output. Manufactured utilizing high grade, 100% Stainless Steel and precisely cut Pyrex, the iSub Sub-Ohm Tank has a capacity of 4 milliliters in a small, travel ready form factor. Featuring staggering 12 mm wide and 3 mm tall dual adjustable airslots, the iSub has the capability to be driven from 20 to 35 watts, making it an ideal match with the all new iTaste MVP 3.0 Pro! Priding itself in innovation, Innokin has introduced the No-Spill Coil Swap System, compartmentalizing the coil and liquid holding systems, making coil removal an absolute breeze.

The feature-stacked iTaste MVP 3.0 Pro Starter Kit by Innokin Technology is the perfect device combining superb quality craftsmanship and affordability right out of the box. All you need to do is add e-juice!

What's in the Box:
  • 1 x Innokin iTaste MVP 3.0
  • 1 x iSub G with 0.5 Ohm Coil
  • 1 x USB Charger Cable
  • 1 x Ego Adapter
  • 1 x User Manual

iTaste MVP 3.0 Pro Product Features:
  • Built-in 4500 mAh polymer Li-Ion rechargable battery
  • Variable Voltage: 3.0V - 9.0V in 0.1 volt increments
  • Variable Wattage: 6.0W - 60.0W, 0.5 watt increments
  • Standby current: 200uA max
  • Maximum output Wattage: 60W
  • Maximum output Current: 17.5A
  • Maximum output Voltage: 9V
  • Clearomizer Resistance: 0.2 ohm (minimum)
  • Utilizes vRMS DC Current - Power deviation is held within .1 watts
  • New chipset
  • OLED Screen providing full readouts for battery life, output and ohm reading
  • Remembers last voltage or wattage setting
  • 510 spring loaded, brass positive contact
  • Stainless steel threading
  • Integrated Micro USB Cable at the base
  • Output port: DC5v/1A

iSub G Product Features:
  • No-Spill Coil Swap System
  • 0.5 ohm iSub Coil - 20w to 35w
  • Incredible Vapor and Flavor Production
  • Stainless Steel Integrated Widebore Drip Tip
  • 4 Milliliter Capacity
  • 12 mm by 3 mm Dual Adjustable Airflow Slots
  • Stainless Steel Construction
  • Pyrex Tank
  • 22mm in Diameter

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling. Innokin also warns against using a mechanical mod with the iSub. Please ensure that your device is capable of firing 0.5 ohm coils!

Advanced User Item. Use At Your Own Risk.

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Average Rating: 5 of 5 Total Reviews: 47 Write a review »

  0 of 0 people found the following review helpful:
Broken sub tank and the infinite short circuit. August 16, 2016
Reviewer: Anonymous Person  
I was excited about this product up until I put it together. The protecting system disagreed with my sub tank and was unable to fire, nor was it able to reboot. The extender screw for the sub tank has become stuck and is unable to be removed, and my sub tank's bottom screw popped right off after a quick un-twist. It's pretty much a paper weight now.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
MVP 3 Pro 60 August 3, 2015
Reviewer: Pamala Bowers from Lithia Springs, GA United States  
I am in love got the white and I love it

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Excellent 60w Mod July 10, 2015
Reviewer: Ron O from Stanwood, WA United States  
*Update* I've had my Silver MVP 3 Pro for a month now and it's been absolutely fantastic. It's easy to use and works great with every tank and RDA I have. Ohms meter is very accurate. The battery has lasted me well over 2 days of heavy vaping. Pass-thru charging is definitely a handy feature so you can vape while the battery charges.

However, the iSub G is a different story. Flavor is terrible and the coil only lasted 3 days. Never had it above 25 watts and I primed the coils before using. Maybe I got a bad coil but I pretty much tossed it. Get yourself a quality tank like the Atlantis 2 or Kanger Sub Tank.

Even with the terrible tank I still give it 5 stars because the mod is bulletproof. I definitely recommend it for anyone looking to get into sub-ohm vaping or just anyone who wants a quality 60w box without the hassle of buying/charging batteries. Get the express kit without the tank.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Awesome Product, Awesome Service June 20, 2015
Reviewer: Vaping Bill from Marseilles, IL United States  
2 in 1 review. First the MVP 3.0 Pro 60W delivers the goods! Sure it's not a million watts, but it wasn't designed for that. Sturdy product, very solid and performs like a pro. Now the ISub; In manufacturing, you can make a bunch of the same thing and 99% of them are perfect. I got the one that wasn't. Leaked everywhere, not just where you might expect it to. This companies Customer Service was on it in a flat second. I got a credit applied to my account and was able to order a replacement. Got it yesterday and it's perfect.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Sturdy! June 18, 2015
Reviewer: Anonymous Person from Howell, NJ United States  
Great kit! Everything u need to get started. They even give u a 10ml bottle of juice to get started. Great battery life! Heavy duty mod looks like it'll last.

Was this review helpful to you?

View All Customer Reviews